Log in

View Full Version : c20xe hard start


dave beety
14-09-10, 11:40 AM
i just put a crank sensor in my c20xe and it still wont start and a coolant sensor to im lost with this car now guys :confused:
Sloth
14-09-10, 11:46 AM
why do you keep making new threads? if you hasve changd the cps for a new one and it wont run its a wiring fault. who wired it in?
dave beety
14-09-10, 11:50 AM
me went by a print out
on the net
Sloth
14-09-10, 11:53 AM
which print out...? link?
brainsnova
14-09-10, 11:53 AM
http://www.pngclub.com/forum/showthread.php?t=86668
dave beety
14-09-10, 11:56 AM
ill try this bud thanks my seh engine was easy to put y cant this lol
dave beety
14-09-10, 12:05 PM
the wiring the same for a coil pack one?
Sloth
14-09-10, 12:12 PM
yes. 3 wires is all it needs to run.
dave beety
14-09-10, 12:17 PM
which ones is that bud sorry to keep on u lot not had anuf of me yet lol
Sloth
14-09-10, 01:34 PM
red power feed for the ecu, black ign on near the coil plug, and the blue/red for the fuel pump. make sure you have 2 earths on it.
dave beety
14-09-10, 03:02 PM
i have a 2l fuel pump on it so do i put it to that wire ?
Southie
14-09-10, 03:08 PM
4- These are the dash signal plugs, out of these two you will use the following wires:

BLUE- Temperature Display for Dash, to BLUE on Nova dials
BROWN with BLUE trace- ECU warning light, colour for colour on injection Nova dials/Digidash, unless it was a carb model, in which case, use the choke light as a ECU light, which is BROWN with YELLOW trace
GREEN- Tachometer (rev counter) goes to GREEN on nova dials

FUEL PUMP- This is the thick wire which goes to the fuel pump, the fuel pump live. It is blue with a red trace, as illustrated.

http://img.photobucket.com/albums/v14/lashednova/xejibberish.jpg ;)
dave beety
14-09-10, 03:19 PM
do i cut thick red and blue and put to my pump ?
Sloth
14-09-10, 03:45 PM
you join it to the pump yes. dont cut it from the relay plug though....
dave beety
14-09-10, 06:12 PM
i dont get any power if i do that bud to the pump ?
Sloth
14-09-10, 06:22 PM
then just put your pump to an ignition live.
dave beety
14-09-10, 06:29 PM
ok cool thanks bud
dave beety
15-09-10, 08:18 AM
wired it all up still wont start would the ecu be dead?
david dixon
21-09-10, 10:22 PM
have you wired your black ignition live up?
sorry if you have mentioned this as i didn't read right through

David.
dave beety
22-09-10, 12:18 AM
Yea put the black wire on bud got a ecu on it's way lol I'll try it if not work I got some think gone big time
dave beety
23-09-10, 12:31 AM
got my ecu to day and it started up at the turn of the key well happy now lol