PDA

View Full Version : 1.6 8v K&N, loom, ECU (C16SE, E16SE etc)


Iain
24-08-10, 08:33 PM
K&N air filter, almost brand new, to suit 16SE airbox (Nova GTE/GSi) and maybe 14SE too? (SRi). £20

http://www.iainel.co.uk/images/forums/ForSale4/KNPanel1.JPG

Bosch 1.6 8v loom and ECU to suit dizzy engine. I think it may be missing the RON plug but my E16SE ran fine with this. Sold

Postage available on everything.
Iain
26-08-10, 09:37 AM
Also got an AFM.
Iain
26-09-10, 08:14 PM
Bump.
Iain
14-10-10, 01:08 PM
Anyone want these?
love em
14-10-10, 01:28 PM
where abouts are ya matey
Iain
14-10-10, 01:28 PM
Nottingham.
Iain
27-02-11, 11:08 AM
Still got these 1.6 parts
beggsy
27-02-11, 06:20 PM
could do with a 1.4 sri loom you wouldnt know whever the 1.6 would work? Im not sure
Iain
27-02-11, 06:28 PM
Not sure sorry mate, I can get you a part number off the ECU if it helps.
nova_mike
27-02-11, 06:30 PM
im after a full gsi injection set up so loom, ecu, inlet and all the sensors ect... is it only the loom you have?
Iain
27-02-11, 06:33 PM
Yes think this is the only one sorry. I believe it's for a dizzy engine setup so if your GSi engine has one of those I believe it will work/can be made to work
nova_mike
06-03-11, 09:17 PM
Yes think this is the only one sorry. I believe it's for a dizzy engine setup so if your GSi engine has one of those I believe it will work/can be made to work

lol what i ment was i need the whole lot as it is on carb's and has nothing i.e. no loom no dizzy no inlet ect... so what i ment was do you have the other parts as well as the loom i.e. crank sensor, map sensor or afm, idle control valve, coil, dizzy ect... should of explained it better before sorry lol

mike
Iain
06-03-11, 09:20 PM
I read it as "is this the only loom you have" my fault! I have the ECU & loom (pictured) and I think an AFM. Maybe a dizzy and coil but I think they went with the engine
nova_mike
06-03-11, 09:59 PM
I read it as "is this the only loom you have" my fault! I have the ECU & loom (pictured) and I think an AFM. Maybe a dizzy and coil but I think they went with the engine

ok mate think ill have the afm and loom/ecu do u wanna check see if you got anything else to chuck in, it would need to be posted as collectin would not be possible would that be ok?

Regards mike
Iain
06-03-11, 10:08 PM
I'll check what I've got tomorrow evening and drop you a PM
nova_mike
06-03-11, 10:30 PM
I'll check what I've got tomorrow evening and drop you a PM

Spot on mate cheers for that

mike
tommy8252
29-03-11, 06:48 PM
If you've still got the e16se loom how much posted to La14?
Iain
29-03-11, 06:50 PM
The Bosch loom and ECU went to Mike above, sorry. Edited first post.
tommy8252
29-03-11, 06:55 PM
Oh well I'll just have to keep looking, cheers