1.0 to 2.0 corsa b, No Spark!

[maddogdaz666]

ive just done the conversion and was pretty sure all the wirin was ok, at first i had no fuel and no spark, ive figured out that if i send a wire strait from the loom plug (big red with blue line) to the fuel pump it works! (its an early gte engine n loom) but i still have no spark! There is power to the coil but no spark, anythin else i could try? Ive tried a new crank sensor, still nothin. I dont have a spare coil to try as this is my next option.

[saloonwoody]

how much voltage you gettin to the coil ?

[maddogdaz666]

i dunno, ive not checked that lol

[swedge]

Check that first then lol

[Sloth]

**** dude if you'd have said i have a coil and brand new pack here. if you getb really stuck i may be able to pop over at some point....

[mowgli]

just where did you get the ignition live from???

is it a nova 1.0 or a corsa 1.0???

[Sloth]

corsa 1.0 mowgli.

[mowgli]

oh, a mercy killing then... ok, so i'm still thinking there is an issue with the switched ign +ve if its not giving a spark, its usually somewhere near the ign +ve

[Sloth]

which is what i said last night to daz. blue wire sorted it mate? did you pm lee?

[maddogdaz666]

im pretty sure ive got ign live right as the fuel relay clicks as the ignition is switched on and the coil gets power (only tested with a bulb and wire, ive no voltmeter) may need that coil rob plz! If u fancy a jog over here your welcome!

[maddogdaz666]

im gonna try a different ign +ve mowgli. Im sure ive tried it strait to the battery tho. N still no joy.

[maddogdaz666]

im gonna try a +ve live strait from the ignition after work, but im sure ive had that strait to the battery n still no joy.

[Sloth]

it will be sat or sun mate, thats the only time im free.

[maddogdaz666]

i might have it runnin by then! lol

[maddogdaz666]

still no spark gonna have to try another coil tmoz. anybody help? or got any suggestions.

[maddogdaz666]

ive put power to pin 28 on the ecu and it started! so i need an ignition live to here i think?

[Sloth]

yeah man :)

[maddogdaz666]

today i unplugged the transponder as it doesnt need it, and surprise surprise it started! without my temporary wire to pin 28!!

[Sloth]

lol you prob confused it....

[maddogdaz666]

it confused me! feckin crappy egg!

[Sloth]

lol, theyre good for that....

[maddogdaz666]

fecking oil cooler sandwich plats cracked now tho!

[Sloth]

ring autovaux and order a c20ne blanking peice £4 iirc

[maddogdaz666]

My dad got a union from work so ive taken it off n put the oil filter back on without it. all sorted now! woohoo!!!!

[Sloth]

dude, can he get any more? like 5-6? i will happily pay fer em...

[maddogdaz666]

i suppose so, to get rid of the oil cooler sandwich plate and just screw the filter up?