braided fuel lines

[richi]

i have a nova stripped out with copper fuel lines running through the car, can i change them to something that looks better like braided fuel lines, anyone no where i would get them from so the size and length is correct thanks

[mk1nova_rich]

yes braided are fine, make sure you use injection specific if you are running injection. most auto/motorsport suppliers can get the hose for you. It is usually supplied in metres so obviously measure how much you need and round up to the nearest metre :thumb:

[stt]

you can always get stainless steel overbraid to cover the copper lines,

If you want to go for braided lines you need to make sure you get PTFE lined stuff

http://www.speedflowshop.co.uk/

[craig green]

If you want to go for braided lines you need to make sure you get PTFE lined stuff

http://www.speedflowshop.co.uk/

or it will stink!

speedflow are a pukka supplier too. :thumb:

[richi]

you can always get stainless steel overbraid to cover the copper lines,

If you want to go for braided lines you need to make sure you get PTFE lined stuff

http://www.speedflowshop.co.uk/

didnt no they even did overbraid think i will do it this way and if it looks gash try again thanks for the help guys:thumb:

[Mazz]

If you don't get the lined hose then the petrol vapours will get you!

[MARTIN KELSON]

I can vouch for the smell of fumes :)

[steviet293]

teflon pipe is what you need to prevent the smell and sore heads. here is a link.http://stores.ebay.co.uk/Torques-U-K

[MARTIN KELSON]

Might change all mine over the winter :(

[richi]

well after going out in the car today i noticed the smell of petrol again so i will have to change the lines for braided found this article if its of any help to anyone

http://www.pngclub.com/forum/showthread.php?t=108162