View Full Version : think my engine went bang lol
stevenf
14-08-10, 08:50 PM
good excuse to change from the 1.0 to the 1.4 lol
mk1nova_rich
14-08-10, 08:52 PM
pics or it never happened lol
this thread is pointless without pics
We want to smashed up pistons, bent rods, burnt out valves, holes in the block, knackered cranks ....
stevenf
14-08-10, 09:02 PM
aint got pics yet. took rocker cover off and one of the vavles just aint there lol gonna get engine changed the morn so will remember to get some pics when i rip the head off :)
aint got pics yet. took rocker cover off and one of the vavles just aint there lol gonna get engine changed the morn so will remember to get some pics when i rip the head off :)
No the first thing youve got to do is take the 1.0 apart and put the pics up for our amusement!
Then and only then will permission be granted for you to put the 1400 in.
stevenf
14-08-10, 09:04 PM
lol do you know what engine oil to use in the 1400?
lol do you know what engine oil to use in the 1400?
it's an 8v, anything 'wet' will do. Put veg oil in it.
pictures , or its bulls**tlol
Come on - pics!lollollolrules is rules!!!!!!!!!!!
rules is rules!!!!!!!!!!!
Exactly!:p
dougie_boi
14-08-10, 11:11 PM
lol do you know what engine oil to use in the 1400?10/40 semi synthetic :thumb:
markc20xe
15-08-10, 12:09 AM
pics!!!!!!!!!! lol
knockhill on the sabath of the 22nd? still making it?????????????? lol lol
MattBrown
15-08-10, 12:23 AM
If it was a 993, I did 3 of them lol
It will be, a bent valve, as the rockers bounce out of place, and twist, so boing lol
Did one on a down shift, thinging i was cool on a roundabout lol
mk1nova_rich
15-08-10, 12:52 AM
Driving a 1.0 FTL
Racing a 1.0 FTMFL lol
stevenf
16-08-10, 10:56 AM
knockhill on the sabath of the 22nd? still making it?????????????? lol lol
of course i will :) aint managed to get the head off the 1.0 but the 1.4 is in and just about ready to run :D
I dream of a day when I blow my 1ltr up, you sir are lucky
my mate grenaded his, just dont change out of 2nd. at all.
no 4 piston exploded and nommed the head/valves/everything.
Come on pics of said blown up engine!
still no pics, can see this getting closed
Driving a 1.0 FTL
Racing a 1.0 FTMFL lol
Score.
Pistol Pete
16-08-10, 09:26 PM
Driving a 1.0 FTL
Racing a 1.0 FTMFL lol
lol
No pics=LIES!!!
i can't believe blowing up a 1.0 merits having a thread......... anyone daft enough to try & rag a 20 year old ****ter of an engine..... ooops.... big & small block ohc lumps are actually a 35 year old design.......
stevenf
16-08-10, 10:47 PM
right i have been too busy trying to sort the running problem of the 1.4 to even think about stripping the head off the 1.0. it seems to be running 3 cylinders and not firing on the 2nd cylinder. its getting spark to all the plugs and its just confusing me now. does anyone have any ideas as to what could be causing this problem as i need the car for work.
stevenf
16-08-10, 10:47 PM
i can't believe blowing up a 1.0 merits having a thread......... anyone daft enough to try & rag a 20 year old ****ter of an engine..... ooops.... big & small block ohc lumps are actually a 35 year old design.......
i was doing 60mph in 4th gear when it blew up.
/\ on that evidence, then this thread needs closing right now
/\ on that evidence, then this thread needs closing right now
why
in my 1.2 4 speed i could do 70 in 4th gear... lol
If it only has 4 gears it'll do a few more mhp in 4th... not many more though haha
1.4 = do a comp test.
1.0 strip and show is teh nom.
that is all
right i have been too busy trying to sort the running problem of the 1.4 to even think about stripping the head off the 1.0. it seems to be running 3 cylinders and not firing on the 2nd cylinder. its getting spark to all the plugs and its just confusing me now. does anyone have any ideas as to what could be causing this problem as i need the car for work.
just cos a plug will spark on the outside of the engine doesn't mean it will on the inside.
the other option is a hyd lifter has gone.. rocker cover off is 2 minute job
ive had 3 1litre novas and absolutely blasted the bollucks off them all.Not one ever missed a beat.I even had 92mph for a constant 30miles with no trouble
I used to bang flames out of them aswell.
ive had 3 1litre novas and absolutely blasted the bollucks off them all.Not one ever missed a beat.I even had 92mph for a constant 30miles with no trouble
I used to bang flames out of them aswell.
I had 97 for 15 miles it was fine. Revving it's nuts off though.
yes I have a huge private garden
stevenf
17-08-10, 04:38 PM
just cos a plug will spark on the outside of the engine doesn't mean it will on the inside.
the other option is a hyd lifter has gone.. rocker cover off is 2 minute job
will go have a look under the rocker cover :)
andy, an indicated 130 (120 on the gprs) down staxton hill in a 1.0 2dr = certain death.... lol
andy, an indicated 130 (120 on the gprs) down staxton hill in a 1.0 2dr = certain bullsh!t.... lol
editted for truth..
a 1.0 nova couldn't do 120mph if dropped from an aeroplane
i hyave a pic of the speedo somewhere mowgli....
i hyave a pic of the speedo somewhere mowgli....
yes, and i can get a pic of my speedo when running with one corner on a jack....
ok fine, believe what ya want. not getting drawn into it, i know what i saw.
stevenf
17-08-10, 05:40 PM
all lifters are fine. car is now running 3 cylinders on first half of throttle but 4 at full throttle.
dave watson
17-08-10, 05:58 PM
why
in my 1.2 4 speed i could do 70 in 4th gear... lol
in my 1 litre 4 speed i had 107 out of it lol
dave watson
17-08-10, 06:00 PM
right i have been too busy trying to sort the running problem of the 1.4 to even think about stripping the head off the 1.0. it seems to be running 3 cylinders and not firing on the 2nd cylinder. its getting spark to all the plugs and its just confusing me now. does anyone have any ideas as to what could be causing this problem as i need the car for work.
some 1 has done away with youre number 2 piston and conrod mate
stevenf
17-08-10, 06:20 PM
spark plug or ht lead?
already changed them all :(
stevenf
17-08-10, 06:21 PM
picture of 1.0
http://i218.photobucket.com/albums/cc80/stevenf86/Photo-0016-1.jpg
stevenf
17-08-10, 06:22 PM
looks like valve dropped and went through the piston lol
stevenf
17-08-10, 06:29 PM
+ REP
Carnage!!!!
made a lovely noise when it done it lol
mk1nova_rich
17-08-10, 06:32 PM
+rep given also lol
dave watson
17-08-10, 06:35 PM
+ rep i think thats youre problem am suprised the thing still didnt try to go
stevenf
17-08-10, 06:37 PM
the rest of the piston was wrapped round the crank :)
stevenf
17-08-10, 06:40 PM
now need to figure out what is wrong with the 1.4 :)
+rep , thats my kind of thing
stevenf
17-08-10, 07:22 PM
anyone got any idea as to why the 1.4 aint running right?
fair bit of oil on the left hand side think it might o been leaking tht may be why it stoped :p lol
^EH? Thats were the push rods go
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.