PDA

View Full Version : advice wanted on c20xe



dc1984
13-08-10, 05:55 PM
looking for a little help please lads, should there be an ecu with this engine? found a large connector in the loom, where should it go to?

any advice would be great:thumb:

AlexW
13-08-10, 05:56 PM
every injection engine has a ECU, should be inside the car, will be a big 30+ pin plug for the ecu.

Get pics of plugs and post them up in the correct section and people will be able to help.

Southie
13-08-10, 05:57 PM
Yes you should have a grey square metal box that connects to it, people usually feed the wire through the bulkhead in the battery tray and the ecu sits behind the dash.

dc1984
13-08-10, 05:58 PM
every injection engine has a ECU, should be inside the car, will be a big 30+ pin plug for the ecu.

Get pics of plugs and post them up in the correct section and people will be able to help.
cheers buddy, am guessing that might be missing then.

dc1984
13-08-10, 05:59 PM
Yes you should have a grey square metal box that connects to it, people usually feed the wire through the bulkhead in the battery tray and the ecu sits behind the dash.
just going out to check and see if its there.

Ben
13-08-10, 05:59 PM
As said take some pics of the plug you have so people can tell you what it is.

dc1984
13-08-10, 06:15 PM
http://i951.photobucket.com/albums/ad359/davids2010/work%20fone%20pics/workfone2002.jpg
http://i951.photobucket.com/albums/ad359/davids2010/work%20fone%20pics/workfone2001.jpg

dc1984
13-08-10, 06:16 PM
cant find the metal box tho:(

AlexW
13-08-10, 06:18 PM
that is the ecu plug

Southie
13-08-10, 06:19 PM
Yep that should have the ecu plugged into it. The smaller blue one is the fuel relay I think.

dc1984
13-08-10, 06:20 PM
do i need the ecu that was with the engine?
sorry if these are daft questions.

bmw156
13-08-10, 06:22 PM
yes you do, you have to make sure you get the right code as well i think.

the ecu looks like this (there is two there)
http://t1.gstatic.com/images?q=tbn:4wIxO3woJheJBM:http://www.mk3oc.com/upload/35784aa98919780cc.jpg&t=1 (http://t1.gstatic.com/images?q=tbn:4wIxO3woJheJBM:http://www.mk3oc.com/upload/35784aa98919780cc.jpg&t=1)

http://www.migweb.co.uk/forums/engines-transmission/390490-identify-what-vehicle-c20xe-ecu.html

quite a helpful link i would say
(http://t1.gstatic.com/images?q=tbn:4wIxO3woJheJBM:http://www.mk3oc.com/upload/35784aa98919780cc.jpg&t=1)

Cle
13-08-10, 06:23 PM
Tbh mate id rip the engine and wiring out the car and start again

dc1984
13-08-10, 06:26 PM
GUTTED!!!!

tempted to scrap it the mood am in the now:(

shall see how i feel in the morning.

bmw156
13-08-10, 06:27 PM
dont scrap it, just take a read of the guide on here, in the guide area and see what else it says to do

Cle
13-08-10, 06:30 PM
Id offer to help but you are a fair bit away

mowgli
13-08-10, 06:31 PM
did you get the whole car?

Ben
13-08-10, 06:33 PM
Sorry but you are being giving bad advice here!

You do NOT need the ECU from the same car as the engine, there are always cheap XE ECU's for sale and its not the end of the world!

Southie
13-08-10, 06:33 PM
Mowgli have a look at his build thread on the last few pages it will explain all.

dc1984
13-08-10, 06:37 PM
Sorry but you are being giving bad advice here!

You do NOT need the ECU from the same car as the engine, there are always cheap XE ECU's for sale and its not the end of the world!

cheers mate, is there anything i should look for when trying to get on from scrapyards etc?


thanks for the help lads:thumb:

bmw156
13-08-10, 06:41 PM
Sorry but you are being giving bad advice here!

You do NOT need the ECU from the same car as the engine, there are always cheap XE ECU's for sale and its not the end of the world!
surly he will need an ECU from the "right" engine though, right meaning coilpak or dizzy.

dc1984
13-08-10, 06:46 PM
surly he will need an ECU from the "right" engine though, right meaning coilpak or dizzy.

What is a coilpak mate? is that the orange/red bit that the ht leads go onto?

bmw156
13-08-10, 06:51 PM
on yours, i think its a dizzy engine, so no coilpack.
the dizzy is yes the red bit which the leads go into

:)

dizzy like yours
http://i212.photobucket.com/albums/cc137/andy20008/C20XEM25.jpg

coil pack
http://i212.photobucket.com/albums/cc137/andy20008/C20XE.jpg

mowgli
13-08-10, 06:53 PM
Mowgli have a look at his build thread on the last few pages it will explain all.

i think the law should be involved. and if he claims there was no contract, then the build thread is full of his plans.... that is a contract..

press charges for:
1. theft
2. fraud
3. breach of trust.

dc1984
13-08-10, 06:54 PM
on yours, i think its a dizzy engine, so no coilpack.
the dizzy is yes the red bit which the leads go into

:)

cheers mate, can you tell me what the bit is called that goes along the top of the engine? is it just a cover fo ht leads?

dc1984
13-08-10, 06:57 PM
on yours, i think its a dizzy engine, so no coilpack.
the dizzy is yes the red bit which the leads go into

:)

dizzy like yours
http://i212.photobucket.com/albums/cc137/andy20008/C20XEM25.jpg

coil pack
http://i212.photobucket.com/albums/cc137/andy20008/C20XE.jpg

htis is mines mate
http://i951.photobucket.com/albums/ad359/davids2010/work%20fone%20pics/workfonepics025.jpg

grooge
13-08-10, 07:00 PM
the parts thats missing from yours that reads vauxhall is just a plug cover.

dc1984
13-08-10, 07:03 PM
cheers mate, so its just normal leads that go to the plugs then

bazil
13-08-10, 07:30 PM
I can pop over the morra if your about cheif?

dc1984
13-08-10, 07:32 PM
I can pop over the morra if your about cheif?
Your a lifesaver buddy, lol just put a post up askin if anyone was able to have a looklol

MK999
13-08-10, 07:36 PM
cheers mate, so its just normal leads that go to the plugs then

Yeah no coil over plug or anything on the 20xe.

bainyboy sr
13-08-10, 07:37 PM
Your a lifesaver buddy, lol just put a post up askin if anyone was able to have a looklol

as said in your project thread am in glasgow and availble ive done xe engines plenty of times pm me if you want it finished

dc1984
13-08-10, 07:38 PM
as said in your project thread am in glasgow and availble ive done xe engines plenty of times pm me if you want it finished
Pm`d mate

AlexW
13-08-10, 07:43 PM
Its good to see some people helping you out and willing to have a look at it for ya :)

dc1984
13-08-10, 07:47 PM
Ano mate, thanks to everyone for your help. it really is appreciated:thumb:

Southie
13-08-10, 07:53 PM
Must admit it shows what a good club PNG is now, even though it's gay as sin lol

MK999
13-08-10, 07:56 PM
Must admit it shows what a good club PNG is now, even though it's gay as sin lol

Fancy, a bum? lol

mowgli
13-08-10, 07:57 PM
enough gayness, lets help the lad get his car going first.

dc1984
13-08-10, 07:57 PM
lol lol

Southie
13-08-10, 08:01 PM
Mowgli all I now can do is photoshops :cry:

DC1984 I've given you some rep so you've got another green blob lol

dc1984
13-08-10, 08:03 PM
Mowgli all I now can do is photoshops :cry:

DC1984 I've given you some rep so you've got another green blob lol

photoshop is good mate, wish a could do itlol

:thumb: cheers buddy

Rich
13-08-10, 08:06 PM
anything get someone bending over the bonnet lol

mowgli
13-08-10, 08:17 PM
southie, shop all the missing bits into his car to give him something to aim at..(like those tattoos girls have on their backs)

dougie_boi
13-08-10, 08:58 PM
if your stuck i can help out as well mate if you can cover my fuel mate just put an xe i mine as well i thought u were getting a let fitted

Ben
13-08-10, 09:36 PM
enough gayness, lets help the lad get his car going first.

Lets not just go suycking each others dicks just yet, lets get this boys car running first!