PDA

View Full Version : Battery terminals



swedge
13-08-10, 01:45 AM
Anyone know where I can get a + battery terminal which has additional bolts for attatchibg ring terminals to as my standard one is getting a bit overloaded using the 1 bolt

Asa-James
13-08-10, 07:50 AM
any good motorfactors.

Alex J
13-08-10, 07:56 AM
is it a trick question?

Ernie
13-08-10, 08:01 AM
just get one of the big ice batery terminals.
loads of places to fit more wires.
Or make a little fuse box with one feed from the batery then fed out to were ever you need it.
Dont over load tho as we dont want another going up in flames.

mowgli
13-08-10, 08:13 AM
just fix stuff to the alternator or starter then... or shouldn't most of this stuff be attached to the fuse box???

Jack
13-08-10, 11:21 AM
As Ernie says, run a cable to a secondary fuse box and go from there. Need to do this to mine lol

stt
13-08-10, 07:38 PM
polevolt.co.uk

Clicky (http://www.polevolt.co.uk/acatalog/Battery_Terminals.html)

craig green
13-08-10, 07:58 PM
vehiclewiringproducts.co.uk & likewise try ebay for ICE cabling etc

Benn
13-08-10, 10:11 PM
I have a few you can have...

swedge
15-08-10, 06:18 AM
A few terminals?

Benn
15-08-10, 09:47 AM
I have about 6 - and a few +

I use the - for both sides on mine as they have 2 screw in connectors on each for extra connections.

stt
15-08-10, 10:05 AM
Surely the + & - are different sizes?

mowgli
15-08-10, 10:29 AM
/\ of course they are. but sometimes you need to run an earth lead & i don't think its mentioned at the top specifically which one he needs

Benn
15-08-10, 11:04 AM
Some are some arnt. I picked a load up from work, some are the same size.

swedge
15-08-10, 04:29 PM
It's the + side I need

Benn
15-08-10, 06:49 PM
Sure i have a few. I'll have a lookie.