Post your dash displays

[Rich]

Stack dash, custom made, carbon fibre. Need ideas :d

[AlexW]

:p

[blue_peg_16v]

standard gsi 6 dials ftw had digis and it gets boaring not being able to see how big your fines gonna be in bright sunlight

[simonm]

this is my digi in mk1 dash



http://i961.photobucket.com/albums/ae95/simonm5360/digi%20dash/DSC03670.jpg

[Rich]

ive hacked my mk1 dash to bits trying to fit a digi dash, then put the digis into a mk2 astra gte... so going custom now on a carbon fibre backing

How you fix the digis in the mk1 dash??

[mayhem]

astra mk2 gte 16v analog dials.
there very rare, as the where an option, and the 16v was the only one with 250 km/h and 8000 rpm. (gte 8v dials only go to 230 and 7000 rpm)

http://i30.photobucket.com/albums/c341/mayhem22/Foto0378.jpg

http://i30.photobucket.com/albums/c341/mayhem22/Foto0377.jpg

[loggyboy]

http://www.loggyboy.com/images/MeritMk2/VX220Dials/DialsIn3.jpg

http://www.loggyboy.com/images/MeritMk2/14-03-09/Interior/Dials.jpg

http://www.youtube.com/watch?v=aVxYAAsmsfU

[discoinferno]

http://img.photobucket.com/albums/v227/RSGBodystylingska/IMG_0142.jpg

this is mine awaiting some carbon to tidy up the surround a bit

[Stuart]

Mines like Loggys, but mines a real stack :p

[simonm]

How you fix the digis in the mk1 dash??[/quote]

with a lot of fiddling and small bit of filler on the edges wouldn need filler if doing it again just dont have another dash to do it with but just made up a couple of little brackets to mount it

[Rich]

http://img.photobucket.com/albums/v227/RSGBodystylingska/IMG_0142.jpg

this is mine awaiting some carbon to tidy up the surround a bit

The oil light etc is upside down lol I was looking at that little display on the tweeks website, think im going spedo, rev, fuel level and water temp. then boost, oil temp and pressure where the cd player should go

Are the vx220 dials a pain to fit?

[vaughanmc]

GTE Digidash:
http://i56.photobucket.com/albums/g191/vaughanmc/My%20Nova/SV202897.jpg
Still got my original plug and some Nova GSi 6-dials if I ever get fed up of the Digidash though :)

[Stuart]

Yes (well easy for me as I have them in the car they are meant to be in lol).

The speedo is electric and fed from the ABS unit.... not that hard to get an ABS sensor to pulse convertor from Dom on mig. The engine temp needs either a MK4 ECU (yes the whole ECU) or one from a VX as the sensor goes into that and then its converted to a PWM signal to the dash. Some guys on the z22se forum are working on a convertor box as they want to run aftermarket management and keep the std dash.
Fuel needs a bit of fricking about with a pot to get the bias right.

Other than that, easy lol

[MARTIN KELSON]

http://i12.photobucket.com/albums/a220/NOVAMARTIN16V/NOVA%20PICS/Picture290-1.jpg

http://i12.photobucket.com/albums/a220/NOVAMARTIN16V/NOVA%20PICS/Picture086.jpg

Couple of pics of my Stack

Pricey bit of kit but really nice.

Martin

[daverobson]

^Nice!!!

[simonm]

that looks soo cool love the flocking

[Wazza024]

Heres a picture of mine

http://i177.photobucket.com/albums/w212/gary23_2007/S7300203.jpg

[loggyboy]

^^^^ETB digidash, i'l be fitting one of them to the Kitcar. Lots of features, lots of bits included, bargain price. NOICE

[bmw156]

http://i30.photobucket.com/albums/c325/bmw156/DSC_4381.jpg
:D

[wwmnw]

http://i220.photobucket.com/albums/dd220/lostboy_014/SDC10016.jpg

:D :D

[loggyboy]

Are the vx220 dials a pain to fit?
AS stu said, but I used a astra digidash transducer and a pulse converter from Dom on Mig.
Fuel guage works in reverse (ie full shows empty, empty shows full)
I wired a seperate temp guage.
I have been told the genuine stack dials (earlier elises IIRC) are easier to wire in when it comes to the coolant temp.

[Stuart]

Yeah the S1 elise has a 'normal' temp gauge, the N/A vx with a real stack has the stupid pwm temp gauge as does the VXT non stack.

I have seen people put switches in so that they can look at oil temp but no idea how they wired that in without screwing up the ecu lol