View Full Version : E16SE Engines
Anyone know how many plugs they have on the back of the E16SE block and what these plugs are for? Cheers
if you have left over plugs you will be better off taking pictures of them or at least listing the wire colours
andy_mk3
24-07-10, 10:21 PM
Crank sensor and oil pressure are the only ones on the block aren't they?
crank sensor would be C16 E16 doesnt have a crank sensor
shrtwrec20
24-07-10, 11:53 PM
Oil pressure is on the oil pump iirc
there should be one for this thing i cant remember the name of
http://i790.photobucket.com/albums/yy181/Bazil_2468/Picture039.jpg
andy_mk3
25-07-10, 12:02 AM
Coolant temp sensor is that?
Danny s-p
25-07-10, 12:04 AM
coolant one on the side the head is it
coolant one on the side the head is it
yip below the dizzy, supplementary air valve?
andy_mk3
25-07-10, 12:42 AM
coolant one on the side the head is it
I meant the one for the temp gauge
I meant the one for the temp gauge
thats the one below the dizzy, the one on the radiator is for the fan only;)
the one below the dizzy is the ecu temp sender. the one on the box behind the inlet is for the temp gauge. the one on the left of that pic is on the later one i think. cos i swapped my inlet for a later one & spent ages trying to work out what wire fitted it.
I've got the plugs in the side the head an on the inlet, just need to know what plugs you have on the back of the block itself, should there be 2?
Danny s-p
25-07-10, 05:10 PM
this the back my e16se block i can only see the oil presser switch bottom right
http://i737.photobucket.com/albums/xx20/dannys-p08/nova%20gte%20project/Photo0523.jpg
Using the picture above the bit I'm looking for is the plug I've blown up in this picture..
http://i614.photobucket.com/albums/tt228/Bakes_013/0b61997f.jpg
General Baxter
25-07-10, 07:22 PM
thats a knock sensor i think lol
its an oil temp sensor for the ECU
Danny s-p
26-07-10, 05:54 PM
i didn't even see that lol
Ha ha, what's the verdict people? Oil temp sender for the ECU?
craig green
26-07-10, 08:32 PM
Ha ha, what's the verdict people? Oil temp sender for the ECU?
Yes. No knock sensor on these.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.