Cheeze
19-07-10, 09:06 PM
Right having a problem with my car and idling high once it has heated up
Basically i have a 2.1 on r1 carbs running megajolt ignition,
the jets are drilled to 1.8mm and the needles are set to the highest point on the needle itself, the mixture screws are also set at what is stated which i think is 3 turns, but no info infront of me at the moment.
It starts of at about 900 rpm then started to rise to about 1500 without the throttle being touched, the butterflys are fully closed also as the idle cable is fully unwond and not touching the stay
Any one any ideas?
Basically i have a 2.1 on r1 carbs running megajolt ignition,
the jets are drilled to 1.8mm and the needles are set to the highest point on the needle itself, the mixture screws are also set at what is stated which i think is 3 turns, but no info infront of me at the moment.
It starts of at about 900 rpm then started to rise to about 1500 without the throttle being touched, the butterflys are fully closed also as the idle cable is fully unwond and not touching the stay
Any one any ideas?