PDA

View Full Version : clearout, vernier pulley xe let x16xe and corsa bits



scottc1088
19-07-10, 06:51 PM
right so iv decided its time for a clearout as iv got way too much stuff.
iv got pics of some of the things but can get any more if you need them
if you feel the asking price is too high them pm me your offers as im open to offers on everything

c20let/xe:
c20let inlet cam £15
standard afm to turbo pipe £15
http://www.corsasport.co.uk/carimages/8858/DSCF9246.JPG
oil pickup pipe £5
http://www.corsasport.co.uk/carimages/8858/DSCF9251.JPG
cambelt back plate £5
http://www.corsasport.co.uk/carimages/8858/DSCF9250.JPG
turbo cover cut to fit a corsa £20
http://www.corsasport.co.uk/carimages/8858/DSCF9242.JPG
standard tophat £15
http://www.corsasport.co.uk/carimages/8858/DSCF9248.JPG
c20let fuel pressure reg not sure what pressure its set to but was running evo5 chips and afr was fine with std injectors £15
rocker cover £20
sfi box £10
http://www.corsasport.co.uk/carimages/8858/DSCF9247.JPG
v belt power steering pump £20
http://www.corsasport.co.uk/carimages/8858/DSCF9186.JPG
thermostat housing £10
calibra turbo calipers £30
20xe inlet manifold with throttle body and traction control unit, 6 pin tps £offers
multi v alternator £20

c16xe, x14xe, x16xe:

v good condition starter motor £15
thermostat and housing stat only done 2k £10
water pipes from rear of engine £10
power steering pump £15
ecotec engine cover £5
pre ecotec engine cover £10
multi v 70a alternator £15
cam pulleys £15
c16xe pistons and rods £30
fuel rail £10
x16xe injectors £15
c16xe injectors £20

corsa/nova/tigra:

x16xe custom downpipe £20 pic to compare with std
http://www.corsasport.co.uk/carimages/8858/DSCF9253.JPG
corsa lower arms £10
corsa rad fan £5
corsa sri front anti roll bar £10
rear gearbox mount that holds gear linkage £10
corsa sri calipers £15
corsa tie bars £10
rev counter cable clocks £20
corsa gsi shockers x4 £20
tigra rear lights £20
strut tops with bearings £10
corsa interior panels and elec window switches £offers?
mpi corsa fuel pump to suit c20xe/let £15
http://www.corsasport.co.uk/carimages/8858/DSCF9256.JPG
standard gear linkage with mount £20
lower arms with powerflex bushes 2k miles old £30
http://www.corsasport.co.uk/carimages/8858/IMG_0124.jpg
rear stub axle £10
16v engine rubber mount £10

other:

various silicone bends/joiners all 2.5" apart from the 2 bigger 90 bends which are 3"
http://www.corsasport.co.uk/carimages/8858/IMG_0140.jpg
2.5" vband clamp set £25
http://www.corsasport.co.uk/carimages/8858/DSCF9245.JPG
rubber and metal engine gearbox mounts £offers on what you need
f15 gearbox close ratio 3.74 cwp £40
ill update with more items when i get time, let me know if you need any more info

scottc1088
21-07-10, 07:33 PM
ttt

Cle
21-07-10, 09:41 PM
How much are you wanting for the " various silicone bends/joiners all 2.5" apart from the 2 bigger 90 bends which are 3"

scottc1088
24-07-10, 03:50 PM
How much are you wanting for the " various silicone bends/joiners all 2.5" apart from the 2 bigger 90 bends which are 3"
which ones do you need?

swedge
24-07-10, 03:58 PM
You have a bolt in fuel guage sender by any chance

scottc1088
24-07-10, 04:10 PM
no sorry

Cle
24-07-10, 05:56 PM
which ones do you need?

How much for all them ?

scottc1088
26-07-10, 06:38 PM
ttt

scottc1088
28-07-10, 07:19 PM
ttt

scottc1088
30-07-10, 05:09 PM
ttt

scottc1088
02-08-10, 10:19 PM
ttt

scottc1088
04-08-10, 08:23 PM
ttt

scottc1088
08-08-10, 03:26 PM
ttt

scottc1088
10-08-10, 07:01 PM
ttt

scottc1088
12-08-10, 10:21 PM
ttt

scottc1088
16-08-10, 07:05 PM
ttt

scottc1088
21-08-10, 05:46 PM
ttt

dave beety
22-08-10, 09:19 AM
would u have a coil pack loom for a 20xe ?