Mike
12-07-10, 09:48 PM
All pieces are genuine 100% real 2x2 carbon fibre twill wet layed by hand, none of the fake tat (plastic sheets coated in twill or lick & stick effect stuffs) all sizes are in mm & all prices include delivery. Gloss finish one side, usual dull/matt finish to rear.
Piece 1 (smallest of the 3)
Dimensions: approx 140x100x0.9*
£ Sold
Piece 2 (medium of the 3)
Dimensions: approx 250x185x1*
£ Sold
Piece 3 (largest of the 3)
Dimensions: approx 370x290x0.7*
£ Sold
Piece 4 (Left overs from today - 19.07.10)
Pulled fresh this morning, however this item is not sqaure at all!
Dimensions: approx 230L x 210W on one side x 190W on opposite side x 195L x0.9*
£ Sold
Piece 5 (Left overs from today - 24/07/10)
Pulled fresh Friday morning. Not sqaure
Dimensions: approx 115L x 85W x 0.7T*
£4.00
Piece 6 (Left overs from today - 24/07/10)
Again pulled Friday morning, also not sqaure.
Dimensions: approx 115L x 115W x 0.7T*
£4.00
Or can do both 5 & 6 for £7 delivered.
(28/07/10) Right got more of this now in all different sizes & shapes from crap ive been making this week.
If you want any, let me know what dimensions your after & ill see if I can match it upto any of the bits Ive got left over & will go from there.
Dont be put off by the cheap prices compared to anywhere else, the reason its cheap is I make it at home for my own & mates project cars/bikes so Ive got next to no overheads at all.
*A note to consider before purchase, the thickness of this matierial. This is single ply carbon sheet offcut NOT suitable for anything structural as its not thick enough (for this you'd require overlayed FG impreg sheet - thicker & a lot stronger) These would be ideal & more suited for ethestically pleasing item's or cut & used as cover's or dash blanks for heater holes etc.
Piece 1 (smallest of the 3)
Dimensions: approx 140x100x0.9*
£ Sold
Piece 2 (medium of the 3)
Dimensions: approx 250x185x1*
£ Sold
Piece 3 (largest of the 3)
Dimensions: approx 370x290x0.7*
£ Sold
Piece 4 (Left overs from today - 19.07.10)
Pulled fresh this morning, however this item is not sqaure at all!
Dimensions: approx 230L x 210W on one side x 190W on opposite side x 195L x0.9*
£ Sold
Piece 5 (Left overs from today - 24/07/10)
Pulled fresh Friday morning. Not sqaure
Dimensions: approx 115L x 85W x 0.7T*
£4.00
Piece 6 (Left overs from today - 24/07/10)
Again pulled Friday morning, also not sqaure.
Dimensions: approx 115L x 115W x 0.7T*
£4.00
Or can do both 5 & 6 for £7 delivered.
(28/07/10) Right got more of this now in all different sizes & shapes from crap ive been making this week.
If you want any, let me know what dimensions your after & ill see if I can match it upto any of the bits Ive got left over & will go from there.
Dont be put off by the cheap prices compared to anywhere else, the reason its cheap is I make it at home for my own & mates project cars/bikes so Ive got next to no overheads at all.
*A note to consider before purchase, the thickness of this matierial. This is single ply carbon sheet offcut NOT suitable for anything structural as its not thick enough (for this you'd require overlayed FG impreg sheet - thicker & a lot stronger) These would be ideal & more suited for ethestically pleasing item's or cut & used as cover's or dash blanks for heater holes etc.