what bonnet vent ?? :)

[pie]

im after a bonnet vent to feed air to my TB'S

but dont want anything chavy n tacky :lol:

await your ideas :)

thanks

[mowgli]

sort out some real metal louvres...

or a cold air feed from the front of the car.

[vaughanmc]

Isuzu Trooper vent - Keep it old skool :)

[Big_Chap]

im after a bonnet vent to feed air to my TB'S

but dont want anything chavy n tacky :lol:

proper rock and hard place mate. although if your looking to FEED the bodies you'll need a scoop rather than vents. Isuzu/monteray is "keeping it real" but i don't know if it makes massive differences, i know a guy who experimented by using big duct hosing from both sides of the front bumper to the bodies and measured the temps with a little lcd thermometer and said the differences were a couple of degree's iirc which isn't that much unless your track/racing etc.

[craig green]

I agree the Trooper/Monteray vent looks best & is the only choice I'd go for tbh from an aesthetics POV. But I doubt they feed much air in to the trumpets tbh as the intercooler they feed on a Trooper is rubber sealed under the vent.

[Rysee]

I kinda like Renault 19 16v bonnet vents but probs would look gash on a Nova

[pie]

any pics of the tropper vent??

i do track it alot :)

was also thinking headlight out jobby?

[Tommy_nova]

Pie i have a tropper vent :)

[Big_Chap]

any pics of the tropper vent??

i do track it alot :)

was also thinking headlight out jobby?

if your gonna track it often then i'd personally pop the lights out and even space the bonnet up at the rear hinges using spacers or washers and longer bolts, then its back to standard looks in 10 mins! :thumb:

[blue_peg_16v]

i had a clio 16v vent on mine will be returning when the car comes out again

http://i293.photobucket.com/albums/mm71/richardmee/Imag00121.jpg

[pie]

tha looks sweet blue peg :)

esay to fit?

[GDN16v]

Trooper scoop with bonnet cut outs underneath!

http://i170.photobucket.com/albums/u241/a16vnv/novagrill.jpg

http://i170.photobucket.com/albums/u241/a16vnv/bonnetscoop1.jpg

http://i170.photobucket.com/albums/u241/a16vnv/bonnetscoop.jpg

[vaughanmc]

Trooper scoop for my Mk1 Nova (Cut out underneath as well - My car will be running 40's)

Also Mk3 Astra GSi vents at the side (Also cut out)
http://i56.photobucket.com/albums/g191/vaughanmc/New%20Nova/SV203029.jpg
Maybe a bit too much for some people but I like it :)

[pie]

sweet fella :)

[blue_peg_16v]

tha looks sweet blue peg :)

esay to fit?

i didnt do it but it took phil ages its an actual clio bonnet welded into a nova bonnet it was the underside that took alot longer as he didnt want it to look a mess the montarey one is alot easier to fit

[pie]

ok thanks blue peg :)

tropper vent it is the :)