View Full Version : cams
id like 2 know if its possible 2 fit a cam out of a 2.0 into a 1.4 sri also if its possible is it 1) a ball ache 2 do
2) will it make ne difference
thx 4 ne help
epo :twisted:
mikeoxford
08-05-03, 11:42 AM
get a kent cam.
comne reccomended by myself, dan (i think) and also velos
nice 1 thx saved me sum ?? and time as some 1 offered me a 2.0 cam
how much is it 4 faster cams roughly and does ne 1 know ne 1 whos sellin em or where i can get em?
thx epo
youl be lookin at ?170ish for just the cam
the cam you will need is a kent cams ast1 camshaft
mikeoxford
08-05-03, 10:12 PM
id get the ast2 comes well recommended
Snowface
08-05-03, 11:14 PM
i'm looking at getting the ast2k kit. ?225 is the cheapest i seen it.
THAT AST2 KENTCAM IS FULL OF SHIT U GONA FIND OUT THE HARD WAY KID. I SAY AST3 WITH A WEBER32/34 IS THE DOG BULLOCKS
mikeoxford
09-05-03, 04:29 PM
THAT AST2 KENTCAM IS FULL OF SHIT U GONA FIND OUT THE HARD WAY KID. I SAY AST3 WITH A WEBER32/34 IS THE DOG BULLOCKS
i found it fine
velos reccommend it
dan just bought it, rates it, sorted out his flatspots etc.
AND DONT FCUKIN SHOUTTTTTTTTTTTTTTTTTTTTTTT
YellowTurbo
10-05-03, 11:53 PM
on the subject of cams....what will be the best cam for my 1.6 16v engine, with mantzel power box, 4-branch manifold and superchipped ECU?
MR OXFORD THAT AST2 KENTCAM IS RACE/RALLY PROFILE, ITS GOT 290 DURATION ITS PATHETIC ON ROAD USE.
THAN AGAIN IT DEPENDS WHAT YOU USE IT FOR BUT SORRY DARLING FOR SHOUTING AT YOU
mikeoxford
11-05-03, 01:29 AM
MR OXFORD THAT AST2 KENTCAM IS RACE/RALLY PROFILE, ITS GOT 290 DURATION ITS PATHETIC ON ROAD USE.
THAN AGAIN IT DEPENDS WHAT YOU USE IT FOR BUT SORRY DARLING FOR SHOUTING AT YOU
:lol: fairy nuff
and the cam did fine for me :)
First off, easy on the caps beghy.
Secondly, you don't know what this lad is using his car for or what other mods he's got. The AST2 cam might be exactly what he's after. Yes, it will be lumpy at low down revs, but it'll work wonders higher up the rev range.
There are all sorts of Cams available to suit your car. Give Velos a ring 01283 542484 and ask them for some advice on what Cam you should get. They have a website which might provide you with a bit more of an idea as to what your after http://www.vmotorsport.fsnet.co.uk/
Hope this helps
Jim
nice 1 thx ill do that
epo :twisted:
ermm just to continue the ast2 talk :oops: , i have just fitted this in replacement of a 285 piper cam, the car is ideal for town driving and not at all lumpy (the piper was worse), it will also pull cleanly in 5th from as low as 24mph and gradually improve as power builds.
Now i know my 1650 engine is a tad diff to most that would follow this route but all the same please dont just expect it to be harsh, as mike has said it seemed fine in his also. As for mine it still needs a r/r to get everything from it but i am sure CP will back me up in my finds as we drove the car for 2 1/2hrs back to mine after doing the cam swap.
In the coming months i shall be doing a report on r/r and various mods and why u need to get the car tuned etc etc etc. just need to get mine finished as its previous poor results and whatever i get next time will be used just to show certain aspects and reasons etc etc
Snowface
11-05-03, 03:55 PM
cool, lookig forward to that r/r report dan.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.