1.6 gsi engine head bolts

[mike williams]

hi
i need the order of removing the head bolts and the order to put the new bolts in and the torque pressures

would be a great help

thanks

mike

[AlexW]

Order when removing isnt so important. Your get tightening sequences and torque settings with the new bolts.

[mowgli]

Order when removing isnt so important. Your get tightening sequences and torque settings with the new bolts.

you should really undo them in the reverse order to the tightening sequence, and in stages.... nobody does though......except me.

i don't have any head bolt info with me till later on. but most decent headgaskets come with a guide.

[mike williams]

i will be gettin gm head gasket and bolts
i have read my engine code and there is not a C or E at the begining of the code how do i tell the type

[mowgli]

basically, the actual engine bit is the same, its down to the electronics & if it has a CAT. thats what the C stands for

put the number on here

[mike williams]

16se0711964

[MK999]

just get the standard hex, non torx style head bolts, as the torx ones round for fun.

[mowgli]

ok, do you know if it has a lambda probe in the exhaust or not?

if yes, then c16se, if no, then e16se

[mike williams]

thanks guys its an E

[Andy]

Order when removing isnt so important.
BS,you can warp the head.They dont put the sequence there for sh1ts and giggles