View Full Version : My New Mod (Techie/Ross eat your heart out!)
mikeoxford
05-05-03, 10:45 PM
Boot Install! Consisting of:
2 Channel 150w Amp
12" Sub In a Ported Box (made and measured cubic airspace)
Auto acousitcs shelf with kicker 7x10s and neon
12v mini fridge
oxygen free cabling all round.
neutrik connector to disconnect parcelk shelf (quick release for cables)
Install:
http://www.novaload.net/forums/album_see.php?id=782
Install Neon Lit:
http://www.novaload.net/forums/album_see.php?id=780
Amp Enclosure & Fridge:
http://www.novaload.net/forums/album_see.php?id=781
im well chuffed :D looks REALLY professional in the flesh.
mmm - nice ice.
Amp on ice - or ice on ice
:lol:
Well nice ice 8)
Really pro finish there matey. I like that alot. Never under estimate the usefullness of a fridge in a car :lol:
when you fitting the microwave?
fridge
wtf! :?:
i can agree with stereo but kitchen utensils?? :P looks nice tho mike, the sub will mess up the sound of the shelf speakers :(
mikeoxford
05-05-03, 11:11 PM
when you fitting the microwave?
fridge
wtf! :?:
when i saw ian had replied last in general chat forum i thought uh oh....... here we go!!!
cudnt stop laffin at your joke this time tho! usually its abuse lol. but u got me this time!!!
like the ice on ice ade ;)
novaboy_southwest
05-05-03, 11:38 PM
love that want to come to swindon and do mine ??//
mikeoxford
05-05-03, 11:41 PM
love that want to come to swindon and do mine ??//
duno how far swindon is?
for a bit of beer money and petrol id oblige..............
maplins do a fridge that can hold 18 beer cans and also if you wish it will heat to 50 degrees (i think its that high)
ok for warming yer pies up (DAN)
hope you didnt pay too much for the neutrik connector, they are usually ?12 for plug and socket, i only paid ?5 for both from maplins in sperate bits. :D about 3-4 years ago
mikeoxford
05-05-03, 11:46 PM
maplins do a fridge that can hold 18 beer cans and also if you wish it will heat to 50 degrees (i think its that high)
ok for warming yer pies up (DAN)
hope you didnt pay too much for the neutrik connector, they are usually ?12 for plug and socket, i only paid ?5 for both from maplins in sperate bits. :D about 3-4 years ago
neutrik connector was kicking around in a box of bits i bought! so i thought hey thats cool ill use it! another little detail!
the fridge i have is a heater as well, its made my same company as maplins one, just a smaller capacity cos i dont wanna fill the boot with a darn fridge!
looks amazing, 20000million times better than the 'amp and pre-boxed sub lashed in the boot' look
not all of us have time to put it any other way fester
i know - have 4 random speakers and where the head unit should be is a load of wires :roll:
novaboy_southwest
05-05-03, 11:59 PM
well swindon is along the m4 in between bristol and reading
and u can stop by for a cuppa with me lol
novaboy_southwest
06-05-03, 12:06 AM
mikeoxford what would be needed i could do it my self really this is my department i am a chippy by trade so easy enough mdf i take it just a false floor with amp and sub in the false floor carpet or checker plate to finish it off and a neon if i wanted
mikeoxford
06-05-03, 12:12 AM
had to do a lot of calculations for the box design and port / air space etc etc for the sub.
lots of measurements invbolved and getting a VERY tight fit against the arches, wasnt happy with anything else!
apart from that what u said!
to be fair NOTHING in modifying a car is hard, NOTHING not even engine work, its pulling it off to a high standard that is the hard part.
anyone can slap a bit of MDF in a boot, but its making it look like it was meant to be there / its not bodged together thats the hard part
to be fair NOTHING in modifying a car is hard, NOTHING not even engine work
Tell that to Ben.... :lol:
Ben (lurk75)
06-05-03, 12:43 AM
to be fair NOTHING in modifying a car is hard, NOTHING not even engine work
Tell that to Ben.... :lol:
You cheecky bar steward :!: :o
very true though, come on down then Mike and get my car running :!: :roll:
Nice 1 mike! hope 2 see it this wekend! lookin good!
novaboy_southwest
06-05-03, 03:44 PM
as i said i am a chippy so it will be done to highest standers my mate who used to own the car put a false floor in and to admit its smart i was going to keep the sub in the box but just ressec it into the floor and just recces the amp and then perspex the hole over the amp and mesh the sub or do a design in the opening for the sub (i aint good at explaing things so u prob not understand what i am saying lol)
Nova-Boy
06-05-03, 07:59 PM
That is a dam sexy boot install! looks the nuts and saves space.
Have you seen that advert with the microwaves? Thats funnier than a fridge!! :lol:
I did my own boot install in the Astra...what do you think?
http://mig.lathwood.co.uk/upload/a/astraice.jpg
http://mig.lathwood.co.uk/upload/a/astraice2.jpg
mikeoxford
06-05-03, 11:12 PM
I did my own boot install in the Astra...what do you think?
i think ur trying to out do me and cant bare for me to do a post similar to you saying oooo look at my new shiney....
:lol: :lol: :lol: :wink: :wink: :wink:
I its nice mate
does the power cap do anything tho?
Ben (lurk75)
07-05-03, 08:16 AM
does the power cap do anything tho?
They most certainly do.They are the most important component in a decent install. If you are spending a serious amount on ICE then your a fool if you dont fit one.
Thats a really cool(geddit??-sorry) neat and tidy install there Mike-like that a lot. 8)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.