PDA

View Full Version : Breaking my 2.0 8v, lots of conversion and early nova parts..



Steve
15-06-10, 01:31 AM
Well ive finally decided, she's getting broke, pics available, and can post most bits at extra cost.

Big block mount kit, drivers mount, gearbox spacers and all bolts/ washers £50 posted

1987 Nova 'L' shell, has had a brand new slam panel and crossmember after I crashed it last year. Arches aren't too bad for the age, has had a plate welded on the sill /bottom of one arch, not the tidiest job but its solid. It will be a rolling shell with no dash/ interior but with have lights and body panels. Underneath is really solid, few bits of surface rust on the floorpan but all structural areas are good. On the logbook as a 2.0, DEPOSIT TAKEN

20SEH engine, just needs new ICV and induction hose, comes with all ancillaries, fuel pump, loom ecu etc.. Done just over 110,000 miles and has a brand new downpipe SOLD

F16 gearbox from 1990 cav sri, believe to be cr box, excellent condition £75

Custom made powerflow exhaust (stainless steel) will fit std 8v or 16v downpipe SOLD

Powerflow twin exit tailpipe for a mk2, stainless steel £40

Suspension kit for big block conversion, consists of bilstein b8 front shocks with new -25mm courtenay sport conversion springs, spax rsx rear shocks with -60mm eiback springs SOLD


Peco stainless steel backbox for a mk1 nova, tailpipe has been shortened (so it doesnt stick out a mile) SOLD


Scorpion stainless steel exhaust, will fit a nova gte downpipe, not sure about other models, excellent condition £100

http://imgur.com/qyUMw.jpg

Four branch manifold for 2.0 8v, will need modifying to fit nova exhaust, only been on for about 6 months £50

http://imgur.com/ra7VA.jpg

22 spline driveshafts with cav cv joints, one brand new SOLD

Nova GTE fuel tank £30

Sparco polished strut brace SOLD

http://imgur.com/Ih9aL.jpg

Snowplough front valance, excellent condition with tow eye cover SOLD

15" cesaros with 3 decent 185/45/15 tyres, one worn on inner edge SOLD

Early sr daytona check front and rear seats, all seats in excellent condition, one tiny burn on rear seats which is barely noticeable, drivers bolster very good, not gone through at all SOLD

Brown dash £40

SR 6 dial orange needle clocks SOLD

Mountenay 3 spoke wheel with boss £50

http://i32.photobucket.com/albums/d9/novamyth/Sr%20Pics/beige%20beast/Picture010.jpg

Also have a cav gsi steering wheel and one from a mk1 astra gte £30 each.

Brown rear door cards £20

http://imgur.com/Te2Sk.jpg

http://imgur.com/fNAVZ.jpg

Front and rear brown carpets, mint condition SOLD

Early nova saloon grill, MINT condition £20

http://i32.photobucket.com/albums/d9/novamyth/Parts/Image0080.jpg

Late mk1/ mk2 tailgate with glass and lock but no key, just needs a clean up where it had a wrap around spoiler fitted £20

http://i32.photobucket.com/albums/d9/novamyth/Parts/15-12-08_1627.jpg


Located in maidstone, kent if you want to collect larger parts.

aaron88v
15-06-10, 07:40 AM
Custom made powerflow exhaust (stainless steel) will fit std 8v or 16v downpipe £100
....

Any pics, and will it run past standard gear selector as opposed to using cavalier shifter? cheers.

regards aaron, will collect if I like.

Dervy
15-06-10, 07:49 AM
really want the cesaros will pm you:d

bmxalex
15-06-10, 08:29 AM
Front and rear brown carpets what coulor are they ??

Sloth
15-06-10, 09:29 AM
steve, yhpm

Edd
15-06-10, 12:12 PM
Do you have brown rear quarter cards ?

Il take them if you do.

burgo
15-06-10, 01:38 PM
you have pm

Simon 1867
15-06-10, 01:47 PM
I will take the seats matey

Simon 1867
15-06-10, 01:48 PM
Front and rear brown carpets what coulor are they ??

Brown

Southie
15-06-10, 02:04 PM
I will take the seats matey
Git :p

Simon 1867
15-06-10, 10:32 PM
Git :p

got to be quick matey.:thumb:

hartley
15-06-10, 10:37 PM
hi mate al take the snowplough valance and the polished sparco strut brace does the snow plough come with all the clips mate

fastcar1cars
15-06-10, 10:57 PM
is the box a close ratio?

Steve
15-06-10, 11:10 PM
Custom made powerflow exhaust (stainless steel) will fit std 8v or 16v downpipe £100
....

Any pics, and will it run past standard gear selector as opposed to using cavalier shifter? cheers.

regards aaron, will collect if I like.
No pics yet as eveything is still on the car, yep it fits round the standard selector just as a normal exhaust would. I'll try and get you a couple of pics from underneath the car tomorrow.

hartley
15-06-10, 11:10 PM
pmd

Steve
15-06-10, 11:19 PM
hi mate al take the snowplough valance and the polished sparco strut brace does the snow plough come with all the clips mate
Hi mate but someone beat you to it on the snowplough but i'll let you know if he doesnt take it, you still interested in the strut brace?

Steve
15-06-10, 11:20 PM
is the box a close ratio?
I believe it is but not 100%, does go through the gears quickly.

hartley
15-06-10, 11:20 PM
r ryt mate if he doesnt take it i will mate would u take £30 for the strut brace

Steve
15-06-10, 11:23 PM
r ryt mate if he doesnt take it i will mate would u take £30 for the strut brace
I'll let you know if he pulls out, £40 im afraid as someone else is interested in it as well.

hartley
15-06-10, 11:24 PM
would u post it

Steve
15-06-10, 11:25 PM
Do you have brown rear quarter cards ?

Il take them if you do.
Yes mate, £20 if you want them.

hartley
15-06-10, 11:27 PM
would u take £50 posted i it in good condition any marks on it

Edd
15-06-10, 11:27 PM
What condition are they in ?

Any chance of some pics please ?

Nova_Tek
15-06-10, 11:36 PM
PM'd ;)

Steve
15-06-10, 11:37 PM
would u take £50 posted i it in good condition any marks on it
Yeah ok mate, good condition, don't think there are any marks on it from memory, can have a better look tomorrow if you want?


What condition are they in ?

Any chance of some pics please ?
There good mate, the material is lifting of a bit so would just need gluing back down, no rips/tears or marks though. I'll get some pics tomorrow for you :thumb:

Steve
16-06-10, 12:10 AM
PM'd ;)
can you empty your inbox please mate :)

Nova_Tek
16-06-10, 12:11 AM
Oops!

Sorted :thumb:

fastcar1cars
16-06-10, 07:34 AM
Can u check for the code on the f16 so i know its 100% close ratio?
Please!

Steve
18-06-10, 05:31 PM
I'll have another look but all I saw last time was just F16 stamped on it.

Sloth
18-06-10, 05:40 PM
steve did you get my pm?

Tony M
19-06-10, 06:43 PM
PM'd :thumb:

scott.parker
19-06-10, 10:29 PM
Steve Ive PM'd you mate..

Steve
23-06-10, 12:28 AM
Pics going up now...

Sloth
23-06-10, 08:59 AM
engine deffo sold?

Edd
23-06-10, 09:41 AM
I'll take the front and rear carpets please, as long as they at in good nic

mk1nova_rich
23-06-10, 11:19 AM
you have PM :thumb:

Steve
23-06-10, 05:41 PM
Yes sorry rob, engines sold, just waiting for the guy to pick it up.

I'll take the front and rear carpets please, as long as they at in good nic In perfect condition mate, i'm guessing you want them posted? lol If so i'll sort out a price for you.

Edd
23-06-10, 07:58 PM
In perfect condition mate, i'm guessing you want them posted? lol If so i'll sort out a price for you.

Yeah posted please mate, get me a price and let me know :thumb:

scott.parker
23-06-10, 08:09 PM
RE, PM'd

Steve
23-06-10, 11:22 PM
pm's replied to, edd i'll find out tomorrow for you and let you know but a bit busy sorting loads of other stuff out atm so do remind me if I forget lol

Sloth
23-06-10, 11:35 PM
btw mate, are you selling the rolling shell?

Steve
24-06-10, 12:00 AM
Yeah mate, details on first page.

Steve
27-06-10, 12:33 AM
bump, will be ebaying soon

floydy13
27-06-10, 01:35 AM
did simon have the seats?

Edd
27-06-10, 07:46 AM
Have you got a price for the carpets posted yet ?

bungle117
27-06-10, 09:50 AM
you have pm :)

Steve
27-06-10, 04:03 PM
Have you got a price for the carpets posted yet ?
Sorry mate I knew i'd forgotten something lol yeah can post for £40, pm me if interested.

Steve
28-06-10, 04:58 PM
did simon have the seats?
Yeah sorry, he's collecting this week.

Original post now updated with more parts :)

Steve
01-07-10, 12:13 AM
Bump, more bits added :)

AlexW
01-07-10, 12:27 AM
Would you split front/rear suspension.

Might be interested in the front setup, ready for my conversion. Pm me duddee

Steve
01-07-10, 12:33 AM
Sorry mate its provisionally sold awaiting payment :/

AlexW
01-07-10, 12:46 AM
:(

scott.parker
01-07-10, 06:15 PM
Steve, still no pics dude, PM me..

Scott

Steve
02-07-10, 12:53 AM
Sorted

Small kink in the left side which would easily come out with some heat on it.

http://imgur.com/5iuY3.jpg

http://imgur.com/V4V5R.jpg

http://imgur.com/sKL1Z.jpg

Steve
04-07-10, 11:14 AM
bttt

Steve
06-07-10, 04:46 PM
back to page 1

dougie_boi
06-07-10, 04:50 PM
pm,d

Steve
08-07-10, 10:40 PM
bttt

Steve
12-07-10, 03:27 PM
1st post now updated

Steve
15-07-10, 10:56 PM
bump, still a few parts available

Edd
15-07-10, 11:36 PM
Have you got the rear shelf supports ?

Do they have the holes for speakers ?

Steve
16-07-10, 12:59 AM
Sorry mate someone has just paypal'd me for them, yes they were the ones without speaker holes.

Steve
17-07-10, 03:28 PM
Post updated