View Full Version : does this engine fit my car
novaproject1
12-06-10, 10:26 AM
1.4 sri z14xep????????????
Well it will fit in the car yes.
novaproject1
12-06-10, 10:49 AM
much work?
will i have to strengthen the bay?
Not much, think you can use std mounts and no.
mk1nova_rich
12-06-10, 10:51 AM
mainly electrical stuff thats the headache on the newer engines. but no the bay wont need strengthening
novaproject1
12-06-10, 10:53 AM
cool
my friend steve scott owner of a1 rally sport rung me yesterday saying he had the engine. he will be doing all the work
mk1nova_rich
12-06-10, 10:59 AM
all the mechanical stuff "should" be straightforward (shafts, mounts, linkage etc) but the wiring will take a bit more work as the later Vaxuhall engines have the chipped ECU and transponders
novaproject1
12-06-10, 11:01 AM
need a new dash as well?
novaproject1
12-06-10, 11:01 AM
http://www.pngclub.com/forum/showthread.php?t=148435
my car
mk1nova_rich
12-06-10, 11:04 AM
i would probably use the Nova SRi/GSi clocks, then use any injection speedo cable with the wiring at the gearbox end.
Ideally you'll need an injection fuel tank & lines too
comptoncj
12-06-10, 12:18 PM
z14xep? chain driven cams? you will need all the interior loom from the donor vehicle as well iirc all the immobiliser is interlinked unless you run different managment.
novaproject1
12-06-10, 01:05 PM
Find a better engine.
ideas? want a 1.4 on throttle bodies??????
as can get a discount on them
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.