6 x 9 cut out template

[dathers]

Has anybody got a 6x9 cutout template that they could scan in and email to me.
I dont wanna guess and have to get another piece of MDF.
If anybody has one please can you send it to:-
d.athers@ntlworld.com
Cheers,
Dave

[novax]

Dude, simply make one by cutting out a piece of paper and trim it til it fits over the speaker, simple.

[burgo]

i find it easier to just draw round the speaker then draw another line 1cm in from the one u drew round the speaker then cut out that one always works fine

[Nova-Boy]

just use trail and error. Are you going to put them on through the top of a standard shelf or on the underside of a mdf shelf and cover with cloth so so cant see them??

[dathers]

A bit of both,i have attatched a piece of MDF to the underside of the standard shelf,then mounted the 6x9's under the MDF,
I stetched a pair of tights over the holes and stapled and glued it down,this stops the speaker cloth from sagging into the holes after a few weeks.then i used grey speaker cloth to cover the shelf,so it looks just like the original shelf.
In the front i have made some door pods to angle the 6" mids up and toward you,out of MDF and fibreglass,with the tweeters in the standard dash positions hidden behind the grills.
I made a fibre glass and MDF enclosure in the spare wheel well and put a hefty grill on it so i can still use the boot if needed.
The amp is hidden in a side panel.

I got a 6x9 template from a local ICE dealer,he let me have a rumage in his skip...lol
Dave

[joeczucha]

lol nice use of tights :lol:

[Nova-Boy]

sounds like a good plan stan! :P