PDA

View Full Version : thinkin of droping my nova



novadave24
07-06-10, 12:12 AM
iam thinking of droping my nova 100mm its on 40mm thinking might cut down the ones ive got dont know wont it looking low for the pvslol

wwmnw
07-06-10, 12:44 AM
Would get uncomfortable after a while wouldn't it? And if you're a porky ******* like me, you'd have fun trying to get out. Mines only -40 and I have roll out :cry: I get stuck between the door and pillar when someone parks too close :cry:

novadave24
07-06-10, 12:48 AM
no iam only 12stone i dont mind it being bumpy just want it on its bum like my golf:)

napalm_27
07-06-10, 02:30 AM
why not do it properly instead of the pikey way and BUY some 80/100mm springs or coilies of egay :tard:

Bubba
07-06-10, 07:06 AM
iam thinking of droping my nova 100mm its on 40mm thinking might cut down the ones ive got dont know wont it looking low for the pvslol

go on...cut pigtails...genius

Andy
07-06-10, 07:37 AM
iam thinking of droping my nova 100mm its on 40mm thinking might cut down the ones ive got dont know wont it looking low for the pvslol
why even bother running springs then.:wtf: :tard:

General Baxter
07-06-10, 07:40 AM
buy my coil overs they start at 100mm lol

MattBrown
07-06-10, 07:56 AM
Just buy 100mm springs.

But for this you will need shorter bodied shocks.

Its cheaper to buy a shat set of coilovers from egay, but, on 100mm, you will knock cv's out of it for a laugh, destroy tires, and it wont handle lol

Nobby
07-06-10, 08:39 AM
we chopped my bros rear springs and all they do is fall out best bet if your on a budget is to heat shrink them, id still buy proper springs though

Dod
07-06-10, 08:59 AM
Cutting springs is dangerous. Dont be a tool.

For a Max drop, you need to cut the spring seat from either the chassis or the rear beam. If you remove it from the rear beam you'll need to re mount it lower. Cable ties and self tapper screws (galvanised so they wont rust) are ideal. If you remove it from the chassis leg you'll need to reinforce it with either some biscuit tin or 3 or 4 layers of rigid card board.

mowgli
07-06-10, 09:24 AM
if you are planning on dropping your car, i suggest getting a parachute would be a prudent idea....

http://www.gearfuse.com/wp-content/uploads/2008/07/parajet-skycar.jpg

but for lowering...... seriously, for road use on real normal roads, don't lower it 100mm.... for one, you won't get over the McDonalds speedhump....
second... you will grind the exhaust pipe off on the bumps, ask baxter

MattBrown
07-06-10, 10:01 AM
if you are planning on dropping your car, i suggest getting a parachute would be a prudent idea....


but for lowering...... seriously, for road use on real normal roads, don't lower it 100mm.... for one, you won't get over the McDonalds speedhump....
second... you will grind the exhaust pipe off on the bumps, ask baxter

Very true, 60mm drop, sat at 70 on the rear, and my exhaust used to scraped the centre box on every speedhump, not fun.

Just take the springs out, bumpstops FTMFW!

novadave24
07-06-10, 08:02 PM
ok thanks for all your ideas iam just going to leave the 40mm on for the show for now.

novadave24
07-06-10, 08:03 PM
how much you want for them mate

craig green
07-06-10, 08:04 PM
, on -100mm, you will knock cv's out of it for a laugh, destroy tires, and it wont handle lol

amen.

stevie-p
07-06-10, 09:25 PM
if you are planning on dropping your car, i suggest getting a parachute would be a prudent idea....

http://www.gearfuse.com/wp-content/uploads/2008/07/parajet-skycar.jpg

but for lowering...... seriously, for road use on real normal roads, don't lower it 100mm.... for one, you won't get over the McDonalds speedhump....
second... you will grind the exhaust pipe off on the bumps, ask baxter

grind the exhasut yes ... but speedbumps are easily tackled

novadave24
07-06-10, 09:32 PM
yeah mcds speedbumps are gay why are they so big

blue_peg_16v
07-06-10, 09:42 PM
Very true, 60mm drop, sat at 70 on the rear, and my exhaust used to scraped the centre box on every speedhump, not fun.

Just take the springs out, bumpstops FTMFW!

not suprised the exhaust caught at 70 over speed bumps lol

i have 90mm springs all round made by coilspring in sheffield

the ride is harsh but just didnt look right on 60mm springs with the loon due to the round arches

blue_peg_16v
07-06-10, 09:44 PM
yeah mcds speedbumps are gay why are they so big

there not speedbumps there intergalactic space ramps

novadave24
07-06-10, 09:54 PM
i whent over one in the golf and it scraped all the front bumper up i go kfc now.