View Full Version : taking off doors
wats the best way to take the pins out. i have an e reg nova and its got hollow pins in the slots and stuggling to get them out any ideas thanks in advance:thumb:
JShannon
06-06-10, 01:41 AM
Cut a section off your bonnet stay and hammer it down. Works a treat fella!!
Joe
bungle117
06-06-10, 02:05 AM
http://www.diytools.co.uk/diy/Main/sp-75-4568-28185-draper-car-door-pin-removal-kit.asp
napalm_27
06-06-10, 02:07 AM
angle grinder :thumb:
or bonnet stay trick what ever takes your fancy lol
I used bonnet stay on one of my doors then an angle grinder on the other and had to use a thin cutting disc to remove the hinges because the pins had embedded themselves in the hinge!
When replacing get oversized pins (cavvy ones) - these protrude above the hinges slightly making it so much easier to remove in the future (should you decide to rain hell on yourself again by rebuilding your car!)
and when you are trying to knock the pins out, remember to put a jack with a suitable rag or similar on it near the back end of the door & raise it up slightly, because when the pins sag, they wear oddly, and look like a small camshaft, and you need to compensate for this wear. if you don't, you could be belting it all day with no joy.
cough, articles, cough
or my sig.
cough, articles, cough
or my sig.
you how to remove door ones links you to your forsale mate. :)
blue_peg_16v
06-06-10, 03:13 PM
my old next door neighbour gave me the proper tool for removing them he nicked it when he worked at renault has a long bolt thing that goes through the centre of the pins then a metal bar with a grove you put on the end of the bolt then you hit it with a big hammer and bingo out they come
Proper tool is sh!t imo. Use the bonnet stay or an old screwdriver etc. If you don't want the doors then angle grinder FTW.
As for replacing the pins, use nuts and bolts!
bainyboy sr
06-06-10, 03:40 PM
wing off hammer and a screw driver easiest way if ever found and ive had loads lol
mk1nova_rich
06-06-10, 03:53 PM
proper tool makes it a piece of piss. i picked one up on ebay for a couple of quid secondhand
you how to remove door ones links you to your forsale mate. :)
pmsl. oops.
scrap what i said then and go to the articles section. lol
L33 LEG
08-06-10, 06:43 PM
On a mk2 i had they came off really easy but struggled like fcuk with a mk1. In the end had to grind them off and made a right mess lol
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.