clock

[paul123]

hi i have seen some picture with a white clock i would like to do this how do i remome the clock.

p.s the clock is next to the hazard waring lights
thanks

[Nova-Boy]

To take the clock out you need to undo the screws that are hiding up in the fan blower grills and possible in the ash try? :? . Tilt the blowers up and you will see them up ther. The take off the pannel which the clock is attached to. The clock should now "pop" off so to speak. Only held on my clips in the moulding.

[ade]

once out the clocks weird - the actual white lines for the minutes are etched onto a clear bit of plastic that covers the hands.

To remove this, you need to pull the centre pin out - watch the hands dont fall off!

If you fit a white back ground, you will prob want to either change the front perspex or just colour the white bits in with an OHP pen.

Ade