PDA

View Full Version : breaking my track car.



adam-d
02-06-10, 06:13 PM
pics can be found here
http://www.corsasport.co.uk/board/viewthread.php?tid=348286
i know its a corsa. but most of its bits will go onto a nova. and the engine is a gte one too.


bilstien shocks £300

fully refurb'd avo coilovers £450

wheels £300

bonnet with aerocatch pins £200

boot with plastic window £200

totally bare shell with cage and plastic rear 1/4 windows, doors and wings £650

new compbrake eccentric solid topmounts £110

plastic front windows £75

ported polished,e16se engine built by bill blydstien
with kent cam, pulley, uprated valvesprings, lifters.
new gen vaux timing gear kit.with recipt water pump too
£450

twin 40 dellorto carbs, and manifold and filters
£450

coolent hoses £120

exhaust manifold £100

manifold back system £150

headertank £100

catch tank £20

front brakes £200

braided brake lines £50


front gsi arb £20

front poly bushes £35

new front arms with bushes £70

fuel tank £30 - £40 with pump

strut brace £30

gsi f15 gearbox £50

brand new gen vaux gsi drive shafts £150

hubs £40

rear beam with brakes and cable £40

bumpers £20 each

front grill £10

front seat mounts £150

cobra monaco seats £120

steering wheel £30

wheel boss £30

snap off boss £50

front tie arm with bushes £50

centre switch panel. and entire car loom. £80

rear lights £10

front lights £10

dials £20

oil pressure gauge. with sender £100

centre electric heater. £10

short shift linkage £40

compromitive wheels with tyres need re-painting 2 tyres aint great. £200

there may be other stuff. . . ill list it when i remember

Rickardo
02-06-10, 06:21 PM
Are you selling the cage??

stt
02-06-10, 07:00 PM
pics of snap off boss please,
what is the pcd of it / what brand wheel fits it?

Thanks

mk1nova_rich
02-06-10, 07:51 PM
is seats price for the pair or each?? location too please :thumb:

adam-d
02-06-10, 07:57 PM
cage goes with the shell,, as its welded in.

boss will fit pretty much any wheel. momo. moutney etc double set of holes.
http://www.corsasport.co.uk/carimages/5993/snapoffboss.jpg

seats is for each.. but make a good sensible offer for both. i prob wont refuse.

Mark
02-06-10, 08:45 PM
Do your boss fix on with a nut, or a bolt?

adam-d
02-06-10, 08:59 PM
a nut. boss to shaft.

then snap off boff boss a bunch of nuts

Mark
02-06-10, 09:56 PM
Ok cheers, need a later one I guess that had a bolt holding the boss to the shaft.

ward
03-06-10, 12:02 AM
how much for the coil and distributor setup fella?
pm me with info please

mk1nova_rich
03-06-10, 12:18 AM
forgot to ask, any chance of postage as you are a bit far for me

Edd
03-06-10, 04:34 AM
Pics of the compomotive's please

adam-d
03-06-10, 08:54 AM
best pic i have atm.
can get better one next day or so
http://www.corsasport.co.uk/carimages/8566/backpoorly.JPG

adam-d
03-06-10, 08:55 AM
another
http://www.corsasport.co.uk/carimages/8566/engineout.jpg

novarally
03-06-10, 09:04 AM
Ok cheers, need a later one I guess that had a bolt holding the boss to the shaft.

Mark.

I have a boss for a Momo (70mm PCD) steering wheel of the bolt-on type that you need.

E-mail;

colinesmith@aol.com

Dervy
03-06-10, 07:34 PM
Pics of the compomotive's please

yes comp pics please :)

nova ian
03-06-10, 08:28 PM
You have a PM

adam-d
03-06-10, 11:05 PM
inbox cleard :)

nova ian
04-06-10, 09:46 AM
Re-sent pm! :)

adam-d
08-06-10, 11:49 PM
:)

Rich
08-06-10, 11:58 PM
what brakes?

adam-d
09-06-10, 08:37 AM
256m ate 2.0 16v cav calipers refurbs new seals and boots
red dot disks
green stuff pads

adam-d
10-06-10, 09:21 AM
some stuff selling now. ill update the post as it sells

adam-d
12-06-10, 09:37 AM
this is what i hate about selling on here.

always get yeah yeah ill have it keep it for me.
then when asked for payment they vanish of the face fo the earth
pissing me off :(

harry-nova
12-06-10, 09:43 AM
hi what engine is it and where about are you

adam-d
12-06-10, 09:50 AM
wirral, merseyside
it is a e16se gte engine.
built by bill blystien. i bought it of a chap on here.
since then it has had new main oil seal. kent cam kit. inc uprated springs and lifters and pulley. new water pump and genuine vaux timing gear kit. with recipt
thats the bare engine
if you want carbs, manifold etc etc ask and ill sort something out

adam-d
14-06-10, 09:14 AM
:)

adam-d
16-06-10, 09:24 AM
if you want stuff im in germany atm, ill try and reply as i get online

adam-d
20-06-10, 09:15 AM
back. all bits can be removed an sent asap

adam-d
20-06-10, 09:16 AM
im back all stuff can be removed and sent asap