View Full Version : I told him...
it was silly... I told him it would be dangerous... I told even told him it'd hurt...
...He told me to film
http://i239.photobucket.com/albums/ff175/Rysee_sri_130/th_30052010023.jpg (http://s239.photobucket.com/albums/ff175/Rysee_sri_130/?action=view¤t=30052010023.flv)
craig green
30-05-10, 10:35 PM
LOL.
No spring compressors FTL.
He looked sh*t scared winding it off. Pussy!
LOL.
No spring compressors FTL.
He looked sh*t scared winding it off. Pussy!
He didn't even believe me it would fly off
t45_ste
30-05-10, 10:38 PM
I once did the topmounts on a golf tdi thinking there was a plate underneath that held the spring.
Put the air gun on it and buzzed it off, nearly shat myself. They are long springs. lol
I hope next time it breaks his hand.
I hope next time it breaks his hand.
That's a bit harsh really
That's a bit harsh really
Not really. He's a tool. If he got a spring embedded in his eyeball, i'm pretty sure you wouldn't be finding it so funny (especially if it was your spring lol)
Accidents are accidents, but in that case he was asking for it lol
novalovingned
30-05-10, 11:04 PM
lmfao. I was laughing before it was even undone lol
lmfao. I was laughing before it was even undone lol
I was laughing at him for even doing it
I know i was staying well out of it, he is a tool
That's a bit harsh really
What if it hit some? Say his mum or little sister? All because he thought it would be cool to video him doing it...
Its stuff like that that get innocent people hurt.
**** that, seen it happen before and the result wasn't as funny.
What if it hit some? Say his mum or little sister? All because he thought it would be cool to video him doing it...
Its stuff like that that get innocent people hurt.
No it was video'd because he was doing it, it wasn't done to be video'd, I said to him when this all goes wrong I'm going to wish I'd got you being a tit on camera so he said film it.
Nobody was in the way, it's pretty clear where it was going hence me stood behind him
claire6069
30-05-10, 11:10 PM
hope thats a lesson well learnt for him!!
tom reid
30-05-10, 11:16 PM
Who gives a flying spring if he hurts himself, I was too busy wating for his troosers to fall down, revealing a JLo type asslol
Who gives a flying spring if he hurts himself, I was too busy wating for his troosers to fall down, revealing a JLo type asslol
Single gayest post on PNG this week... And that's saying something lol
Single gayest post on PNG this week... And that's saying something lol
You've obviously not met Mr Reid before lol
What if it hit some? Say his mum or little sister? All because he thought it would be cool to video him doing it...
Its stuff like that that get innocent people hurt.
Thats exactly what i thought, what if someone had been walking past with their little kids or something like that since he had to run into the road to retrieve part of it that 'part' couldve easily launched through a passing cars window and seriously hurt the driver/occupants, that had the potential to go massively wrong, its just lucky that it didnt:eek:
Thats exactly what i thought, what if someone had been walking past with their little kids or something like that since he had to run into the road to retrieve part of it that 'part' couldve easily launched through a passing cars window and seriously hurt the driver/occupants, that had the potential to go massively wrong, its just lucky that it didnt:eek:
The top mount went barely further than the spring, but rolled down the drive. I understand what you're saying though
not the time or the place really
I found it funny but wouldn't of if some one had been serious hurt and tbh you should of know you were going to get mixed replies, you might of well said your planning on running a undeclared engine conversion
Jeff16v
31-05-10, 08:18 AM
All good fun in the right conditions, inside a dog kennel etc. Not outside. One things that hurts more than a spring in the face is the damage caused when it goes wrong. Try unwinding it up his bottomlol
loon,..
My boss has a decent scar on his face from a spring coming out the compressor!!!
i worked with a guy who had a spring compressor snap, 4 broken ribs......
needless to say, what muppet in the vid did, deserves a slap...
Your mate is a full on cock!! Im aware people do things for the sake of comedy but seriously, fcuk doing it with shock aborbers & compressed springs!
I got hit in the ribs but a top mount that fired of a Peugeot Partner front shock absorder. It bounced off a fridge freezer & put me clean on my ass in lots of pain! The spring compressor jumped off, launching the shock out of a vice while the spring fired across a workshop & a top mount hit me.
Ive also seen a coilover spring go throught a breeze block wall.
Ive also seen a coilover spring go throught a breeze block wall.
Must have been them shizzle Celcon ones that you cut with a hacksaw surely lol
Hopefully he will never do this again. I'm thinking even using a spring compressor i'd
angle it away from me, some shocking stories
i still maintain the safest way is to undo the top mount whilst the car is still on the ground with the full weight of the car compressing the spring
i still maintain the safest way is to undo the top mount whilst the car is still on the ground with the full weight of the car compressing the spring
That's how i'd do a Nova but a mk6 fiesta the strut tops are too far back and couldn't get to them
maybe it was a not having the right tool fail
we had a spring come out of a compressor at work, it went right through a stack of plastic shelves and then through the side of a (full) 40 gallon oil drum :eek: i was not ammused lol
and lol at mr reid
(in fact, i shall preserve that for ever more as a sig lol)
He should of undone it between his legs.Atlease then when then spring shot off it may of stopped him from ever breeding.
What would he of done if the bits had hit a passing car or person.
Not big not clever in my books.
^^ lol at stopping him from breeding
you know it would make sence..
maybe it was a not having the right tool fail
No you definately had a right tool lol
novaguy08
31-05-10, 05:49 PM
Oh dear, what a dangleberry he was being!
Yes in the correct conditions, yes maybe a giggle, however outside, pointing at a public road?? oh dear indeed!
NovaLad
31-05-10, 06:18 PM
Tool.
MattBrown
31-05-10, 06:22 PM
lol
Seems funny, as most things do, untill they go wrong.
Still piss funny though lol
I do them, strut in a vice, with a mate leaning against them with a duvet inbetween, done agood 8 cars now, never had an issue:thumb:
if you don't have a spring compressor kit, then just undo it on the car & then jack it up to remove it...............
MattBrown
31-05-10, 06:34 PM
if you don't have a spring compressor kit, then just undo it on the car & then jack it up to remove it...............
Yup, I mean when we don't have them on a car.
There can be a hell of alot of force behind the springs.
Very dangerous,:wtf:
you should try working in a truck dealership & have a customer bring in a half dismantled springbrake unit & slap it on the counter facing you........ people have been killed by them...... it got him to put it out in the yard & we got the forklift & stuck a test weight on top of it.....when i'd stopped panicking, i reassembled it.....just imagine the forces needed to put the handbrake on on a 44t truck.......car springs are weak in comparison
MattBrown
31-05-10, 06:43 PM
you should try working in a truck dealership & have a customer bring in a half dismantled springbrake unit & slap it on the counter facing you........ people have been killed by them...... it got him to put it out in the yard & we got the forklift & stuck a test weight on top of it.....when i'd stopped panicking, i reassembled it.....just imagine the forces needed to put the handbrake on on a 44t truck.......car springs are weak in comparison
Panicing FTL!
Just work through it, using pikey methods like a fork trucklol
springbrakes are made from 2 castings with an enormous conical washer to hold the inner inside the outer casting. the spring has about 8T of power in it. to dismantle one properly, you put it in a hydraulic press & then pop the washer out. this bloke had been playing with a crowbar & a hammer
is this the missus lol
http://i239.photobucket.com/albums/ff175/Rysee_sri_130/emma.jpg
photobucket lock ftl
MattBrown
31-05-10, 07:06 PM
Body of a 12 year old lol
All the kids toys? seems strange lol
springbrakes are made from 2 castings with an enormous conical washer to hold the inner inside the outer casting. the spring has about 8T of power in it. to dismantle one properly, you put it in a hydraulic press & then pop the washer out. this bloke had been playing with a crowbar & a hammer
Fook that :eek:
lol owned, good find novafusion :thumb:
NovaLad
31-05-10, 07:19 PM
lol @ checking if the account was locked...
As said a bit worrying with all the kid toys about lol
nova_saloon
31-05-10, 07:24 PM
thoose things can be leathal, always compress them can take your hand off. there under so much tension! go through a door.
JamesXP
31-05-10, 09:10 PM
I daren't post any pics on here in fear of someone raping my PB
lol
novaguy08
31-05-10, 09:11 PM
Sorry, how did this thread get from a dangleberry undoing a strut without spring compressors to picture of woman?
Jeff16v
31-05-10, 09:26 PM
my brother in law used to work for a firm that restored Aston Martin's, the spring compressors weren't long enough to fully un-wind so they had to through it in the yard a couple of times for it to come off.
One time it went straight over the roof of the unit and went straight through an ice cream truck rooflol
How am i owned? You have a photo...
Look through all you want i'll bung some more pics up. And no not the missus. Shes 27
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.