PDA

View Full Version : Guess how long


nova_saloon
28-05-10, 11:12 PM
it took me to get the inside of this clean? :d

http://i14.photobucket.com/albums/a306/pirrip/P5280108.jpg

http://i14.photobucket.com/albums/a306/pirrip/P5280109.jpg
hendrix
28-05-10, 11:13 PM
2hr 12min 45 sec??
lol
dj_wudgey
28-05-10, 11:16 PM
a long time?? lol
Mike
28-05-10, 11:20 PM
about 60 whole British summertime seconds with a steam cleaner?
nova_saloon
28-05-10, 11:29 PM
hendrix was very close, but a ****ing long time half the day perhaps, and sorry im not as fancy as you with my steam cleaning equipmentlol...

would it work with an iron if you kept pressing the hiss button haha lol
Mike
28-05-10, 11:31 PM
hendrix was very close, but a ****ing long time half the day perhaps, and sorry im not as fancy as you with my steam cleaning equipmentlol...

would it work with an iron if you kept pressing the hiss button haha lol

LMFAO use a wall paper stripper with the big sqaure head attachment removed ;) ;)
Pete
28-05-10, 11:43 PM
LMFAO use a wall paper stripper with the big sqaure head attachment removed ;) ;)

sha'll be doing this soon ;) never even thought of that lol
Lewis.
30-05-10, 04:32 PM
after pics, or you never cleaned it :p :d
mowgli
30-05-10, 04:33 PM
how long is the cycle on a dishwasher?
CoolTiger
30-05-10, 04:34 PM
5
NovaLad
30-05-10, 04:40 PM
Pics or it didn't happen.
L14MNP
30-05-10, 04:45 PM
Big.
http://i154.photobucket.com/albums/s247/eurojdmp11/Primera/New%20SR20/DSC00053.jpg

BTW, try harder next time. :d
Nova_Tek
30-05-10, 05:12 PM
it took me to get the inside of this clean? :d

http://i14.photobucket.com/albums/a306/pirrip/P5280108.jpg

http://i14.photobucket.com/albums/a306/pirrip/P5280109.jpg

Some carb cleaner would've taken you no more than 10 mins to clean that up.
L14MNP
30-05-10, 05:16 PM
^ Bitch you gots to be high!
Nova_Tek
30-05-10, 05:20 PM
Wuh?
Mike
30-05-10, 05:30 PM
^ Bitch you gots to be high!

What you say fiddy $ent???
L14MNP
30-05-10, 05:32 PM
lol. It's hard to get all that jazz off after the crazy heat it's been through.

Carb cleaner aint up to it.
Iain
30-05-10, 05:35 PM
Agreed carb cleaner is crap for the job.

Remove the breather thing and you'll find lots more to clean underneath/inside that too :)
nova_saloon
30-05-10, 06:36 PM
never wanted to remove that to be honest. and carb cleaner will take off the soft stuff. and i dont have a fancy wall paper stripper. i have brushes, solvents degreaser, and maybe a little caustic soda :D. does the job good. got to get myself a steam cleaner
Southie
30-05-10, 06:43 PM
What you say fiddy $ent???
What you trying to say, that he's shed loads of weight whilst cleaning this rocker lol
nova_saloon
30-05-10, 06:50 PM
plus carb cleaner cost a **** load!
Nova_Tek
30-05-10, 10:03 PM
I cleaned an 8v rocker cover with carb cleaner with ease. Quick and easy. And only used about 1/4 of a bottle. Rather spend £8 and get it done quickly.
nova_saloon
31-05-10, 12:33 AM
believe me, carb cleaner wont get that off. done my previous cover with it, didnt work so well.
craig green
31-05-10, 12:36 AM
I buy carb cleaner from a pound shop, its a quid oddly enough.

You can get little steam cleaners really cheap from the likes of Tool station/screwfix.
nova_saloon
31-05-10, 12:38 AM
well fine im sorry everyone i just did it the long and hard way and it was satifying so nuuurrggggh!!!! :)
Lewis.
31-05-10, 02:41 PM
dont worry, it will look the same as before by july, then you can do it again lol