LET pipes help

[AlanH]

need to know where a few pipes go. Engine is std. externals except a dump valve and fmic (already plumbed in)
have the 2 pipes that sit side by side on amal valve connected on turbo, but unsure where the other side connects to.
where does boost gauge connect to? do i need to connect anything to top of DV?
long pipe from front of the tb and a pipe that runs from the ecu?
built xe's before but dont have much experience with LET engines,got this one in bags/boxes
all help much appreciated
regards
alan

[Nobby]

have the 2 pipes that sit side by side on amal valve connected on turbo, but unsure where the other side connects to. This goes to the front of the throttle body mate

where does boost gauge connect to? do i need to connect anything to top of DV? Not 100% but you can t piece the gauge into the pipe that runs off the ecu
l
ong pipe from front of the tb and a pipe that runs from the ecu? the long pipe goes onto the wastgate on the turbo i think and the pipe off the ecu goes down under the back on the inlet manifold you have to look hard for it or you will miss it lol

[AlanH]

legend! cheers mate + rep

[napalm_27]

use any vacuum hose to the inlet for the boost gauge i used the vacuum from the turbo to the inlet to run mine
and thats all i could work out from your post it hurt my eyes lol

[Nobby]

http://i44.tinypic.com/adz3g3.jpg

[AlanH]

nice one thanks. any ideas about if a vac hose is needed to be connected to top of DV?

[andybishop]

Hopefully these should help...

http://www.nova-turbo.co.uk/boostp5.jpg

http://www.nova-turbo.co.uk/boostp6.jpg

http://www.nova-turbo.co.uk/boostp7.jpg

[andybishop]

nice one thanks. any ideas about if a vac hose is needed to be connected to top of DV?

Yeah just put a t-piece in the vac pipe on the inlet side

[AlanH]

^^ +rep, cheers that really helps

[andybishop]

Forgot to add this one from my collection too..

http://www.nova-turbo.co.uk/image014.jpg