TB'S help...servo pipe

[pie]

hello

i got direct TB'S on my redtop but cant conect the servo pipe as there is nothing to conect it to??

and also there is no were to conect the water pipe on on the side of theTB'S
like on the standard xe inlet?? the water pipe is n men to be by th alternator braket on he inlet

can get pics if needed

thanks :)

[Damo]

Best off getting pics up mate then people get a better idea.:thumb:

[AlexW]

Servo vaccum take off will need putting in, most dont have it as some people run bias boxes/no servo.

[John]

Sbd manifold? if so needs drilling and tapping to accept a union to accept the vac tale off. (between 2 and 3 iirc)

[pie]

they are sbd direct to head so no manifold so i gt tap tale off ya?

any idea on the water pipe ?

[John]

they are sbd direct to head so no manifold so i gt tap tale off ya?

any idea on the water pipe ?

Post some pics fella, Iirc the water union has to be bought separately.

[Lee]

Waterpipe can be left closed, then you dont need to run a return to the T piece between the rad and the expansion tank OR you can drill and tap for a screw in union.

As said before, you need to drill and tap a union between two and three to create a vacuum take off. Ill have a look see if I have any pics.

[pie]

pics would help alot lee thanks :thumbsup:

[craig green]

FFS drill & tap it off the engine.

Is it possible to run a diesel vacuum pump? Brakes rock when the servo is run off those.