PDA

View Full Version : SR Mouldings


dannymcc
19-05-10, 03:52 PM
Can anyone tell me how to take these of to be able to re-use them?
LEWI007
19-05-10, 04:10 PM
I think with heat but im not sure.

NickJ Knows.

And propably alot of other people on here know the proper way to get them off.
L14MNP
19-05-10, 05:09 PM
I'd say heat gun and some cheese wire to cut through the glue. Don't peel them off. You will bend them. IIRC my SR's were metal backed.
LEWI007
19-05-10, 05:10 PM
Yeah they have metal along the back and if you pull the strips off the metal bends out of shape.
L14MNP
19-05-10, 05:17 PM
Yeah they have metal along the back and if you pull the strips off the metal bends out of shape.
http://rlv.zcache.com/im_with_stupid_up_arrow_dark_version_tshirt-p235432203019176618q6ws_400.jpg

TBH just use common sense, if you know bending it will cause damage then don't do it. lol i t only leaves one option IMO, and thats 'cutting' the adhesive.
Southie
19-05-10, 05:23 PM
Heat them off a donor car with a hair dryer & plastic scraper.

The slower you do it the less they'll curl or stretch.


Found this. ;)
kent14sr
19-05-10, 05:35 PM
I reused mine without problem, just take care removing them

Hardest thing was finding something to hold to door ones back on!!
craig green
19-05-10, 06:46 PM
Depending on the year they are either stick on or clip on....
Plug
19-05-10, 07:33 PM
i would say there stuck on. got any pics of them?

my b reg are stuck on but ive seen Y regs with clips
craig green
19-05-10, 07:47 PM
My B plate leaf green like yours Jim was clip on.
dannymcc
19-05-10, 07:54 PM
i would say there stuck on. got any pics of them?

my b reg are stuck on but ive seen Y regs with clips
The car I was looking at was a D reg SR with low miles.
Plug
20-05-10, 09:25 AM
personally i would say stuck on but without seeing them i wouldnt know.

D reg sr with low miles, where to? How much ?
dannymcc
20-05-10, 06:40 PM
personally i would say stuck on but without seeing them i wouldnt know.

D reg sr with low miles, where to? How much ?
;) 17,000 miles :d
Pete
20-05-10, 09:33 PM
mate of mine took his off, used a heat gun and a scraper and they came off straight, takes time but if you want them that much then its no harm :)
dannymcc
20-05-10, 10:01 PM
Thanks for the help guys :thumb:
dj_wudgey
21-05-10, 10:29 PM
mine came off no probs!!