View Full Version : SR Mouldings
dannymcc
19-05-10, 03:52 PM
Can anyone tell me how to take these of to be able to re-use them?
LEWI007
19-05-10, 04:10 PM
I think with heat but im not sure.
NickJ Knows.
And propably alot of other people on here know the proper way to get them off.
I'd say heat gun and some cheese wire to cut through the glue. Don't peel them off. You will bend them. IIRC my SR's were metal backed.
LEWI007
19-05-10, 05:10 PM
Yeah they have metal along the back and if you pull the strips off the metal bends out of shape.
Yeah they have metal along the back and if you pull the strips off the metal bends out of shape.
http://rlv.zcache.com/im_with_stupid_up_arrow_dark_version_tshirt-p235432203019176618q6ws_400.jpg
TBH just use common sense, if you know bending it will cause damage then don't do it. lol i t only leaves one option IMO, and thats 'cutting' the adhesive.
Southie
19-05-10, 05:23 PM
Heat them off a donor car with a hair dryer & plastic scraper.
The slower you do it the less they'll curl or stretch.
Found this. ;)
kent14sr
19-05-10, 05:35 PM
I reused mine without problem, just take care removing them
Hardest thing was finding something to hold to door ones back on!!
craig green
19-05-10, 06:46 PM
Depending on the year they are either stick on or clip on....
i would say there stuck on. got any pics of them?
my b reg are stuck on but ive seen Y regs with clips
craig green
19-05-10, 07:47 PM
My B plate leaf green like yours Jim was clip on.
dannymcc
19-05-10, 07:54 PM
i would say there stuck on. got any pics of them?
my b reg are stuck on but ive seen Y regs with clips
The car I was looking at was a D reg SR with low miles.
personally i would say stuck on but without seeing them i wouldnt know.
D reg sr with low miles, where to? How much ?
dannymcc
20-05-10, 06:40 PM
personally i would say stuck on but without seeing them i wouldnt know.
D reg sr with low miles, where to? How much ?
;) 17,000 miles :d
mate of mine took his off, used a heat gun and a scraper and they came off straight, takes time but if you want them that much then its no harm :)
dannymcc
20-05-10, 10:01 PM
Thanks for the help guys :thumb:
dj_wudgey
21-05-10, 10:29 PM
mine came off no probs!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.