PDA

View Full Version : C20XE dispack loom and air flow meter



Lee H
19-05-10, 12:45 PM
Loom must be in excellent condition, don't want any cut plugs or patched up wiring. Must be for the later dispack XE.

Also need 4 pin air flow meter for same engine in known working order.

Damo
19-05-10, 01:46 PM
Think my mates got a good loom an afm mate for dispak engine.

Al find out for you.

let_nova
19-05-10, 04:48 PM
got loom and AFM here, swap for your nova spi loom with alarm?

Lee H
19-05-10, 04:55 PM
got loom and AFM here, swap for your nova spi loom with alarm?

Is it completely uncut and still has the three plugs near the ecu and the coolant temp sensor plug on and earths for fuel rail (always seem to get broken off)?

let_nova
19-05-10, 04:56 PM
i will go outside right now for you and check mate.

**runs off to find jacket as its raining**

let_nova
19-05-10, 05:01 PM
ok, no plugs seem to be cut off, all earths there.

fuel relay plug, and 2 other black plugs there. doesnt seem to be a green... just 2 black.

but is uncut and still has the plug/unplug connector from cav/calibra

MattBrown
19-05-10, 07:44 PM
One here you can borrow lee, uncut, apart from the 1 switched live wire.

Borrow AFM aswell to faultfind?

Got that engine sat here, anything you need, just take:thumb:

novaboz
19-05-10, 08:37 PM
i have a loom dude :) pm me if interested

Lee H
20-05-10, 08:18 AM
One here you can borrow lee, uncut, apart from the 1 switched live wire.

Borrow AFM aswell to faultfind?

Got that engine sat here, anything you need, just take:thumb:

Cheers Matt. Might be a more sensible option than throwing good money after bad.

MattBrown
20-05-10, 11:24 AM
Cheers Matt. Might be a more sensible option than throwing good money after bad.

Yeah, ill need it back in about 3 months ish if thats ok?

Ring me sometime today, and ill tell you whats herelol

Lee H
20-05-10, 01:14 PM
Will leave it a few days as car is running right this morning with new ICV on so it might not be a loom or afm problem. If it starts playing up again I will be in touch!

MattBrown
20-05-10, 01:29 PM
Will leave it a few days as car is running right this morning with new ICV on so it might not be a loom or afm problem. If it starts playing up again I will be in touch!

Ok:thumb:

Sounds like its something small tbhlol