PDA

View Full Version : clearout! prices reduced



scottc1088
16-05-10, 10:14 PM
right so iv decided its time for a clearout as iv got way too much stuff.
iv got pics of some of the things but can get any more if you need them
if you feel the asking price is too high them pm me your offers as im open to offers on everything

c20let/xe:
square tooth vernier pulley £50
http://www.corsasport.co.uk/carimages/8858/DSCF9285.JPG
saab red injectors, been ultrasonically cleaned £50
c20let inlet cam £15
standard afm to turbo pipe £15
http://www.corsasport.co.uk/carimages/8858/DSCF9246.JPG
oil pickup pipe £5
http://www.corsasport.co.uk/carimages/8858/DSCF9251.JPG
cambelt back plate £5
http://www.corsasport.co.uk/carimages/8858/DSCF9250.JPG
turbo cover cut to fit a corsa £20
http://www.corsasport.co.uk/carimages/8858/DSCF9242.JPG
standard tophat £15
http://www.corsasport.co.uk/carimages/8858/DSCF9248.JPG
c20let fuel pressure reg not sure what pressure its set to but was running evo5 chips and afr was fine with std injectors £15
dispac coilpack £15
http://www.corsasport.co.uk/carimages/8858/Picture.jpg
rocker cover £20
sfi box £10
http://www.corsasport.co.uk/carimages/8858/DSCF9247.JPG
v belt power steering pump £20
http://www.corsasport.co.uk/carimages/8858/DSCF9186.JPG
thermostat housing £10
calibra turbo calipers £30
20xe inlet manifold with throttle body and traction control unit, 6 pin tps £offers
multi v alternator £20

c16xe, x14xe, x16xe:

v good condition starter motor £15
ht leads, done around 2k £10
thermostat and housing stat only done 2k £10
water pipes from rear of engine £10
power steering pump £15
ecotec engine cover £5
pre ecotec engine cover £10
multi v 70a alternator £15
cam pulleys £15
c16xe pistons and rods £30
fuel rail £10
x16xe injectors £15
c16xe injectors £20

corsa/nova/tigra:

x16xe custom downpipe £20 pic to compare with std
http://www.corsasport.co.uk/carimages/8858/DSCF9253.JPG
corsa lower arms £10
corsa gsi front springs £10
corsa rad fan £5
corsa sri front anti roll bar £10
rear gearbox mount that holds gear linkage £10
16v corsa/tigra engine mount with auto tensioner £15
http://www.corsasport.co.uk/carimages/8858/DSCF9252.JPG
corsa sri calipers £15
corsa tie bars £10
rev counter cable clocks £20
corsa gsi shockers x4 £20
tigra rear lights £20
strut tops with bearings £10
corsa interior panels and elec window switches £offers?
mpi corsa fuel pump to suit c20xe/let £15
http://www.corsasport.co.uk/carimages/8858/DSCF9256.JPG
standard gear linkage with mount £20
lower arms with powerflex bushes 2k miles old £30
http://www.corsasport.co.uk/carimages/8858/IMG_0124.jpg
rear stub axle £10
16v engine rubber mount £10

other:

various silicone bends/joiners all 2.5" apart from the 2 bigger 90 bends which are 3"
http://www.corsasport.co.uk/carimages/8858/IMG_0129.jpg
2.5" vband clamp set £25
http://www.corsasport.co.uk/carimages/8858/DSCF9245.JPG
rubber and metal engine gearbox mounts £offers on what you need
f15 gearbox £40
ill update with more items when i get time, let me know if you need any more info

novalovingned
16-05-10, 10:55 PM
Looking for a c16xe engine loom and ecu mate, dont suppose you have? Pm me if you do :)

scottc1088
16-05-10, 11:02 PM
no i dont, sorry

scottc1088
18-05-10, 04:13 PM
ttt

turbo-boy
18-05-10, 06:10 PM
is the 22 spline shafts for a nova or corsa and is the cv joint on they?

scottc1088
19-05-10, 01:35 PM
there corsa ones come with joints aswell

scottc1088
20-05-10, 02:10 PM
ttt

scottc1088
21-05-10, 11:36 AM
ttt

scottc1088
21-05-10, 08:44 PM
ttt

scottc1088
22-05-10, 12:58 PM
up

scottc1088
23-05-10, 12:59 PM
ttt

scottc1088
24-05-10, 10:54 PM
ttt

scottc1088
25-05-10, 10:37 PM
ttt

scottc1088
26-05-10, 08:26 PM
:)

scottc1088
28-05-10, 06:08 PM
ttt

scottc1088
30-05-10, 05:58 PM
ttt

scottc1088
01-06-10, 07:44 PM
ttt

bakerznova
01-06-10, 11:29 PM
how low are the corsa gsi front springs ?
and would you post ?
p.m me :thumb:

brets nova
02-06-10, 02:45 AM
alright mate, looking for some 2.0 front brakes for nova?

scottc1088
03-06-10, 06:27 PM
pm'd
only got v6 calipers or corsa sri ones

scottc1088
04-06-10, 09:54 PM
ttt

scottc1088
06-06-10, 02:26 PM
ttt

scottc1088
09-06-10, 06:23 PM
bttt

scottc1088
10-06-10, 05:49 PM
up

scottc1088
13-06-10, 03:22 PM
ttt

scottc1088
15-06-10, 11:37 PM
updated

scottc1088
16-06-10, 10:36 PM
ttt

scottc1088
17-06-10, 10:41 PM
ttt

scottc1088
22-06-10, 07:10 PM
ttt

scottc1088
25-06-10, 11:06 PM
bttt

scottc1088
26-06-10, 06:02 PM
ttt

Dom
26-06-10, 06:07 PM
what colour and make is the square tooth vernier?
Cheers

scottc1088
26-06-10, 06:25 PM
pic added to first page

Dom
26-06-10, 06:30 PM
Not for me im afraid cheers though buddy

scottc1088
28-06-10, 07:01 PM
ttt

scottc1088
30-06-10, 07:08 PM
ttt

scottc1088
01-07-10, 08:17 PM
up

scottc1088
03-07-10, 08:49 PM
ttt

scottc1088
04-07-10, 07:31 PM
ttt

scottc1088
05-07-10, 05:30 PM
ttt

scottc1088
06-07-10, 06:04 PM
ttt

scottc1088
07-07-10, 05:55 PM
ttt

scottc1088
08-07-10, 07:10 PM
updated

scottc1088
09-07-10, 06:49 PM
ttt

scottc1088
10-07-10, 10:54 PM
ttt

djbrowney
10-07-10, 11:27 PM
£15 posted on the v Band ???

scottc1088
11-07-10, 06:51 PM
20 posted

scottc1088
12-07-10, 08:28 PM
ttt

Trendall
13-07-10, 01:41 AM
how many bumbs do you need??? lol

scottc1088
13-07-10, 07:16 PM
im always adding new parts so as many as it needs lol

Hobbit
13-07-10, 07:48 PM
Just remember its 48 hrs between bumps.

scottc1088
15-07-10, 06:46 PM
up :)

scottc1088
17-07-10, 06:57 PM
ttt

markc20xe
17-07-10, 07:19 PM
ello mate you still got silicone bends/joiners for sale?

scottc1088
17-07-10, 08:42 PM
yeah what do you need?

markc20xe
19-07-10, 12:32 AM
45 degree bend and a couple of joiner pm me price and unless you want rid of the lot pm me detail's if you want mate