View Full Version : E16SE EGR Valve help
Just flashed the codes and got 12 and 47. Code 47 is the EGR valve - any ideas how to fix it?
I've taken it off, cleaned all the carbon off it (that i could get to) and check the breather pipe isn't block, but the ECU light is still on :(
Help!
craig green
16-05-10, 06:33 PM
EGR has no electrical connection. I can't see how or why it'd throw that up??
Its thrown it up before, i think they just get carbon'ed up
craig green
16-05-10, 09:08 PM
Yeah but its not connected via any wire or sensor to the ECU in any way.
I never had any issues with mine, I never actually thought it worked, it seemed too crude & old to work..
As above, it's somewhat similar to your ECU telling you you're out of milk. They don't even have a lambda so it's not even like it can work out the EGR is at fault due to lambda readings.
craig green
16-05-10, 09:48 PM
It makes as much sense as an E16SE fault reading throwing up your lambda..
the std EGR just works on vacuum to operate at small throttle openings/cruise doesent it?
I blanked mine off.
It does indeed work on vac, I never got round to blanking mine tbh.
I have blanked it off now, using the coca-cola can method! The light is on, but it seem to idle and rev a little better...
novanova636
21-05-10, 03:29 PM
any pics of the blanking? what do you do with the vac pipes that go to it?
I did take some actually, i'll get them up ASAP..and just leave to connected up as normal
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.