Best place to route c20xe loom ecu??

[aaron88v]

Im half way there just need a tip please anyone?

Could anyone advise me on the best place on the bulkhead to route my c20xe loom / 60mm bung into the nova and where to mount the ecu.

possibly some pics

Much apprecieated

Thanks regards aaron.

[Riggy]

run the loom round the drivers side turret and through the bulkhead behind the battery , you can the screw the ecu to the drivers side dash shelf :thumb:

here's mine

http://img.photobucket.com/albums/v13/riggy4/3997907941_95de18ef27_o.jpg

[mayhem]

just use the hole where the original loom went inside?
that's what i've done. ecu is bolted to the underside of the glovebox.

[hendrix]

I drilled a hole in my bulkhead where the aerial hole for the radio was then left the ecu dangling..well it is at the moment anyway. Not having plastic dash sides so probably zip tie it down there lol

[aaron88v]

cheers guys but I got up this mornin and bein inpatient decided to hole saw another hole run it trough next to where the original loom comes through, now the loom dosent reach round to the injectors lol.

Plan for tomorow to extend the loom and hide the whole loom behind bulk head where fan blower is and post back through. will post pics up tomorow when it done :)

[hendrix]

extend the loom


good luck!!!!!

[Jon_nova1]

I'm sure i just jammed my ECU between the firewall and fuse relays lol