PDA

View Full Version : 2.0 xe non start



gil
11-05-10, 07:43 PM
anyone on here had problems with late calibra engine losing spark on 2 and 3 cylinder strong on 1 and 2 thinking maybe ecu everything else has been replaced cheers guys

Lee
11-05-10, 07:47 PM
losing spark on 2 and 3 cylinder strong on 1 and 2

That doesn't make sense lol

However it sounds like the coilpack if its strong on two and weak on two.

gil
11-05-10, 09:32 PM
Cylinders 1 and 4 sparking. Cylinders 2 and 3 no spark. New coil pack fitted

Spudly
11-05-10, 09:34 PM
Leads all in good order, have swapped the plugs over from one and three to two and four?

gil
11-05-10, 09:39 PM
New leads. Done all basics. Not plugs as checking with spare plug. When I put my diagnostic machine on I get all plugs firing. Strangest thing I've ever come across. Was hoping someone had experianced this. At this rate I'll rip it all off and go carbs and dizzy.

Sloth
11-05-10, 09:43 PM
there are 4 wires at the coil from the ecu, 1+4 are fed by 2 of them, 2+3 are fed by the others. you possibly have a broken wire. test what volts you get at the plug.

gil
11-05-10, 09:57 PM
Cool will do this first thing.