gauging interest breaking the nova

[tony k]

just gauging interest in breking my nova

engine (bought off game1)

• 1998 Rebuilt C20LET engine, covered approx 8,000 miles, ported and polished Coscoast cylinder head, arp head stud kit and arp rod bolts, duel layered steel head gasket, xe inlet cam, ngk plugs, 8.5mm magecor leads, dizzy, full roose/samco hose kit in blue, paddle clutch brand new, pot type lightened flywheel, front mount including 2.5” hard pipe kit with hoses and clamps, pipercross air filter, up rated oil cooler, radiator, fan. Owen Developments GT2860rs turbo, Nortech manifold, Turbosmart 38mm racing external wastegate and screamer pipe, with fixings – (all new in may 2008, receipts total £1807.16) - covered approx 4,000 miles –has just had new cambelt kit (gates one) and water pump,also custom inlet manifold made by
(novarick) has a v6 throttle body on,has mbe ecu needs map sensor and coilpack mapping and wiring finished got a spare let loom if needed £2300 ono

http://i207.photobucket.com/albums/bb221/tonysturbonova/30122009012.jpg
http://i207.photobucket.com/albums/bb221/tonysturbonova/30122009013.jpg
http://i207.photobucket.com/albums/bb221/tonysturbonova/30122009015.jpg
http://i207.photobucket.com/albums/bb221/tonysturbonova/30122009016.jpg
http://i207.photobucket.com/albums/bb221/tonysturbonova/08122009325.jpg
http://i207.photobucket.com/albums/bb221/tonysturbonova/06082009046.jpg


f28 with quaife diff no wines or crunches 650
gaz coilovers never been on the road fitted to car 350 (sr jack first dibs)sorry david forgot he pm`d me first
equal length shaft setup 200 both shafts
apexi boost controller 350
shell with glass 750 comes with cage has rear disc beam aswell 100
omex launch controll 65 comes with instructions
let engine mount kit 80
solid mounts all three for f28 fitting 100
strengthend bottom arms with powerflex bushes 50
http://i207.photobucket.com/albums/bb221/tonysturbonova/06082009040.jpg

everything is on hold i will let everyone know what parts are up fosale in a week or so

cheers

[ste porter]

i will have first dibs on the inlet if it doesnt go with the engine mate
also i have a proper let manifold and throttle body for a let so if you want i will give you that to make the engine complete again

[tony k]

i will have first dibs on the inlet if it doesnt go with the engine mate
also i have a proper let manifold and throttle body for a let so if you want i will give you that to make the engine complete again

nah thats ok ste will let you know the outcome if i do,oh did you get my pm

[twin40s]

what gaz shocks are they?

[tony k]

there fully adjustable ones not the golds,just need a wipe over
fronts are 300lb
backs are 200lb there the springs are 8ich on both will have to check
http://i207.photobucket.com/albums/bb221/tonysturbonova/22062007015.jpg
http://i207.photobucket.com/albums/bb221/tonysturbonova/22062007014.jpg

[Shaun]

tony im interested in the shafts fella, and also the bottom arms pending price

david dixon can do the shafts new for 130 a pair, so any budge on your price

[david dixon]

£320 for the shocks?

David

[Tommy_nova]

Tony would you just sell the fronts ? :)




there fully adjustable ones not the golds,just need a wipe over
fronts are 300lb
backs are 200lb there the springs are 8ich on both will have to check
http://i207.photobucket.com/albums/bb221/tonysturbonova/22062007015.jpg
http://i207.photobucket.com/albums/bb221/tonysturbonova/22062007014.jpg

[tony k]

tony im interested in the shafts fella, and also the bottom arms pending price

david dixon can do the shafts new for 130 a pair, so any budge on your price

will do them both for 180 delivered,but need the engine sold first before any gets taken off the car

[tony k]

£320 for the shocks?

David

350 delivered

[tony k]

Tony would you just sell the fronts ? :)
want to sell complete

[let_nova]

if you split engine im intrested in manifold

[tony k]

if you split engine im intrested in manifold

want to sell complete thanks tho

[Andy]

Do the rear inner arches need turreting for thos coilovers mate?

[Nick J]

Do the rear inner arches need turreting for thos coilovers mate?

You dont have to turret but they will need a little tapping back and tidying up afterwards as with most rear coilovers.

Nick.

[tony k]

You dont have to turret but they will need a little tapping back and tidying up afterwards as with most rear coilovers.

Nick.

as what nick said cheers mate:thumb:

[Tommy_nova]

Pmd

[tony k]

Pmd

Sent p.m

[tony k]

bump

[david dixon]

remember to keep those coilovers mate :thumb:

David.

[tony k]

remember to keep those coilovers mate :thumb:

David.

Will do mate there got your name on

[tony k]

remember to keep those coilovers mate :thumb:

David.

Wont forget mate

Up for today

[Ernie]

good luck with sale mate and sad it never got on the road.

[tony k]

good luck with sale mate and sad it never got on the road.

Thanks ernie well if the engine dont get sold it will get finished but see what happens

[badboydc]

would u sell the inlet and how much

[tony k]

would u sell the inlet and how much

Want to sell the engine complete

[tony k]

just updated first page

everything is on hold will let everyone know what is up for sale in the next week or so,i wont forget the people who was interested in parts,got there names in my inbox