redtop problem

[novaboz]

rite where to start lol.... when i turn the ignition on the fuel pump isnt powering up but when i put a live to it, it does power up.. tryed the fuel relay but isnt that (going to try another one)

any ideas what else it could be?

also when i do get it running by connecting it to live its trys to cut out and keeps saving it self? revs fine but wont idle fine

any ideas on that one also

[david dixon]

The idling will probably be the ICV.
If its not the relay it could be a ecu fault, just put your pump live to a ignition live if you dont mind it coming on when you turn the ignition on!

David.

[Andy]

As david says have you connected up the ICV pipe?
Trace the wiring from your pump-relay....Have you connected it to a spare fuse slot? connections ok? Terminals at pump ok?

[novaboz]

bin tracing it today if you put live to relay it will work, so wirers from ther are working, its just not geting a feed to the fuse box, goin to try another loom and go from there

[Andy]

try a new loom to eliminate the ecu at fault if you can

[novaboz]

yer im goin to try a loom mate and go from there :)

[Rich]

id try an ecu before a loom, cheaper and easier to do.

Could bridge the wire first to see if it is loom

[novaboz]

goin to change both anyway as loom isnt in the best of conditions lol