ready made c20xe manifold to nova system

[Huffy]

im just wondering do M-tec or lmf make an exhaust manifold for a c20xe to mate up to a nova system im nearing the end of my c20xe build you see and all i needs the exhaust system sorting and as i carnt weld wanted to know if these are availible if not theres a custom exhaust garage about 5 miles away and then theres peco not far away too

[mayhem]

no. why would they.
just get a proper 2 inch system.

[craig green]

Ashely might do a manifold... which would fit their system I think Scott Parker's just fitted it to his track car..?

[John]

just get the centre section modded to fit the front pipe.

[MK999]

should be <£80 to get it modded, as I got bent over for it, only garage within miles that would do it though, plus driving down on the manifold is fun lol

[Riggy]

yeah i think ashley do a xe manifold and system for a nova , but if you already have a decent system then id get the std xe manifold madded to suit a std nova system , then you can change systems when ever you like ,

[Ernie]

i did it with my first 16v build.i used the xe manifold and the front part of a astra gte system then cut the flang off my nova system and sleeved the astra part over the nova system.i put some exhaust paste on first then put an exhaust clamp around it.sorted.

[MattBrown]

Surely a 1.2 system, on his 2.0 engine is gonna restrict the toots out of it?

[Angus Closier]

Surely a 1.2 system, on his 2.0 engine is gonna restrict the toots out of it?

Yeh wont be good! Complete 2.1/2 systems are really not that expensive and they bolt up to a c20xe manifold fine! Would save lots of time and wont restrict the horses!:thumb:

[Huffy]

no. why would they.
just get a proper 2 inch system.

ive gota 2inch magnex system blunt a*s !

just wanted to know are these manifolds ready made cheers for the info guys :thumb: