Air box onto c20xe?

[BIGS]

I know i can use a nova sri air box to mate to the 20xe, but ive had alook at a corsa gsi airbox and wondering if i could use that instead? As the sri airbox is going to be hard to get hold of :(

[craig green]

Prolly not as the inner wings are more generous on a Corsa. Only one way to find out.

[BIGS]

Yea might take it off the corsa and see.

[craig green]

Hallelulah.

[BIGS]

lol Ive got commen sense honist lol

[Danny s-p]

if it work's tell use please but i think i try to fit one before but it sat up to much

[BIGS]

Yea i will, will find out wednesday so ill update this will info

[Rysee]

Will F's thread might be a help

http://www.pngclub.com/forum/showthread.php?t=133872&page=2

[AlexW]

I run a corsa airbox, i had to chop off all the bottom of the box though, even then the box hits the bonnet and there is no way of securing it.

[total_vauxhall]

I run a corsa airbox, i had to chop off all the bottom of the box though, even then the box hits the bonnet and there is no way of securing it. second that but i have cut mine high enough up so that the bonnet shuts fine i also platic welded the bottom back on and screwed through it into the inner wing . can post pics if needed mate:thumb:

[Damo]

second that but i have cut mine high enough up so that the bonnet shuts fine i also platic welded the bottom back on and screwed through it into the inner wing . can post pics if needed mate:thumb:

would like to see pics mate if you could :thumb: .

[total_vauxhall]

yea no bother mate ill be messing with car tomora night so ill snap a few shots.

[AlexW]

second that but i have cut mine high enough up so that the bonnet shuts fine i also platic welded the bottom back on and screwed through it into the inner wing . can post pics if needed mate:thumb:

You did it the proper way then lol

I left some of the bracing bits underneath but could do with doing it proper.

I did wonder about a tigra airbox (Mainly just the lid), but looking at mine its bigger than a corsa one :(