Some bits for sale,that i need gone

[Wazza024]

I have a complete front panel for a mk2 it's brand new never been fitted. It's not a gm panel im afraid. £80 collection only as will get damaged in the post.
http://i177.photobucket.com/albums/w212/gary23_2007/SA400088.jpg

I have a pair of 22 spline shafts with standard inner cv joints, the o/s shaft will need an outer cv boot will come complete with 2 front hubs as well. I will add a picture of them in a bit. £50 collection only



I have a magnex stainless steel exhaust centre box and rear box with a few scratch marks from where a car has been to low but no holes
in it. It come off a MK2 SR. £70
http://i177.photobucket.com/albums/w212/gary23_2007/S7300201.jpg

I also have the cambelt covers off my old 1.4 NV engine painted in white not been used since i had them painted £15
http://i177.photobucket.com/albums/w212/gary23_2007/SA400080.jpg

I also have a pair of sabelt harnesses in red which 4 point ones and mount to a rear brace at the rear of the seatbelt. Year of man was 2003 on the belts. £30 NOW SOLD
http://i177.photobucket.com/albums/w212/gary23_2007/S7300202.jpg

Also i have a MK2 rear bumper which has been started to be smoothed it will need some more work to it to get it perfect but shouldn't take much. £15


All parts listed collection only.

[napalm_27]

i recognise that engine exhaust and ecu ;)
see the fuel lines havnt been pulled out the throttle body yet lol
for anyone that is interested its my old engine and box all runs fine no knocks or bangs :thumb:

oh and yes i caught the cambelt on the mount bracket when taking it out :(

[Wazza024]

i recognise that engine exhaust and ecu ;)
see the fuel lines havnt been pulled out the throttle body yet lol
for anyone that is interested its my old engine and box all runs fine no knocks or bangs :thumb:

oh and yes i caught the cambelt on the mount bracket when taking it out :(

Im thinking of selling the nova. I haven't done anything with it, it's just been sat there since i got it lol

That's the toolbox if you was still interested?

[napalm_27]

grandad bought me a big toolbox for £25 the other day mate
may have the seats off you
and if you want rid of the nova let me know a price and il think about it
the mrs is after one.. well iv told her she's having one lol lol

[Wazza024]

grandad bought me a big toolbox for £25 the other day mate
may have the seats off you
and if you want rid of the nova let me know a price and il think about it
the mrs is after one.. well iv told her she's having one lol lol

Well the seats are there if you want them been sitting there long enough lol

Yeh got to think about the car as i would like to try and find another 1 but cleaner.

[napalm_27]

my red ones are mouldy and the drivers one is bolashed
anyway give me a txt when you decide what you want to do with the nova :thumb:

[djshaggeh]

I may have a nova for sale Wazza. Needs both rear arches doing and a front wing. other then that its fairly clean. PM if your interested. I'm in High Wycombe too.

[napalm_27]

his is in the same boat so he wont want that mate he wants a near on mint one :thumb:

[Wazza024]

up

[napalm_27]

iv lost your number again mate txt me or pm me it please :thumb:

[bai1ey]

will you sell the shafts seprate if so how much posted

[Wazza024]

will you sell the shafts seprate if so how much posted

It depends if i can get rid of the engine etc without them so will have to let you know.

[bai1ey]

pm me when you know any more dude

[Wazza024]

pm me when you know any more dude

Yes wil do mate

[Wazza024]

http://i177.photobucket.com/albums/w212/gary23_2007/SA400080.jpg

[Wazza024]

Right i have a Irmscher inlet manifold for twin 40's which has been shot blasted and i never fitted it since i had it shot blasted so clean. It comes with the studs where the carbs go but no nuts im affraid. It has a bracket attacted which i think is maybe for a throttle cable maybe? It has a snapped stud by the water pipe end which i think maybe connects to a alternator bracket maybe? See pics below correct me if im wrong, the stud should be able to be drilled out if you.

Im looking for £100 o.n.o postage will be extra. NOW SOLD

[Wazza024]

couple of price change's but also open to offers

[Wazza024]

Couple of new things added. Will get pics of the latest 2 up asap

[CalvinR]

PMed

[bigdan1]

you still have those harnesses mate?
is it 30 for both posted?

[Wazza024]

you still have those harnesses mate?
is it 30 for both posted?

Yes still have them. Yes could do them 30 posted

[let_nova]

pm me payment details for the harnesses.

[bigdan1]

havnt you got enough stuff already?
let other people have a chance for once instead of buying everything you can and selling it for more later on!

and ok mate that sounds good to me can you pm me your paypal?

[let_nova]

. and whats that got to do with you?

[bigdan1]

lol you baby get a grip im not going to get banned for you.
you have thousands of unfinished cars from what i have seen and you saw i was interested before you even commented so why dont you FOAD you CNUT

[burgo]

grow up the pair of you or ill ban you and ill buy them.

its upto the seller who he sells them to

[bigdan1]

grow up the pair of you or ill ban you and ill buy them.

its upto the seller who he sells them to

pmsl then you can sell them to me :D

but your right its the sellers choice i was just making a point i wasnt being nasty he was the threatning 1.
anyways bump not spam lol

[bigdan1]

you have the £30 in your paypal for the harnesses mate :thumb:

[Tommy_nova]

cambelt covers interested in these mate will they fit a 1600 8v gsi engine do you know

[Wazza024]

cambelt covers interested in these mate will they fit a 1600 8v gsi engine do you know

Im not to sure to be honest as i've not tried. Hopefully someone else on here may be able to tell you if they do.