PDA

View Full Version : fault code 72 on my c20xe



coombsey
24-04-10, 09:32 PM
i know its some thing to do with the throttle
72 Throttle Switch (TS) - full load contact High voltage - Full load switch not running

why would this come on all of a sudden
also other day i had 44 Oxygen sensor Air/fuel mixture too lean (weak)
and 93 Hall Effect Switch (HES) Low voltage any ideas why these come up i cleared the codes they aint come back on yet

General Baxter
24-04-10, 09:53 PM
check your earths lol

coombsey
24-04-10, 10:07 PM
got earth from gearbox to chassis and one from alternator to battery

Andy
25-04-10, 07:27 AM
got earth from gearbox to chassis and one from alternator to battery
You should have,gearbox to chassis,alternator to fuel rail,plus 2 blacks to the fuel rail which you cant get wrong lol,also there is your Nova loom earth to the chassis where the gearbox one goes.Only the battery earth-firewall should be on the -terminal on the battery

coombsey
25-04-10, 08:21 PM
checked all earths today there all fine cleared codes again was fine for about 2 miles then light came on then off then on off on off