mk1nova_rich
22-04-10, 09:29 PM
Is it best to cut a big hole and slot the complete pedal/MC assembly through so the large plate just sits on the remaining metal of the battery tray and then use 4 bolts to fasten to this??
Im confused because i have seen some pictures where people have used a hole saw and then drilled 8 holes and mounted the pedal assembly by splitting the pedal and MC and bolting through the holes.
Hope this makes sense and i hope someone can shed some light :)
Im confused because i have seen some pictures where people have used a hole saw and then drilled 8 holes and mounted the pedal assembly by splitting the pedal and MC and bolting through the holes.
Hope this makes sense and i hope someone can shed some light :)