View Full Version : studs
i cant he studs out of my head onthe exhaust side they seem to be rusted in i tried wd40 and most other things i dont have lots of money so no suguestions of going to a specialist
any ideas plz
p.s threads on studs are fucked
Aragorn
24-04-03, 08:24 PM
u tried self locking pliers?
try hitting the studs with a hammer to loosen em first (towards the head, not sideways)
if that dont work then blowtorch
tried self locking pliers did hit studs with hammer but didnt want to break them
does a blow torck work wat i do just heat them up and then turn them or let them cool
fearless
24-04-03, 09:15 PM
Screw two 13mm nuts onto the stud and lock them together - then simply unscrew the stud by turning the nut nearest the head !!
thread are fucled cant do that
if the blow torch dont work i thinkin of drilling out stud and putting a helli coil in
cut the end off the stud, then drill a small (suitable sized) hole, then get a stud extractor and screw it in and it will then start to "bit" and "pull" continue screwing until the stud comes out
where i get a stud extractor
how much do ya know
mikeoxford
24-04-03, 11:30 PM
blow torches are amazing things try that first
yeah - blow torch best way - heat en up dso they expand and craxk thr rust - dont go mad though
Ade
mikeoxford
25-04-03, 12:33 AM
to free the nuts without rounding them off also try doing them "up" in effect, so if you do round off the face it is the leading edge to do it up, not the undoing sides.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.