This isn't wanted!!! (Admin) Weber Carbrettors (32/34DTML)

[Snowface]

Anybody know of a store that sells new or reconditoined weber carbrettors? PLus the fitting kit needed for a 1.2 manifold or a 1.3sr manifold. Also, Is there and difference in performance between the 1.2 and 1.3 manifolds if they had the same carb?

I know New the 32/34 DTML's are round ?200. But where from?

(This isn't a wanted add admin!) I just wann enquire. So i don't waste peoples time.

[Aragorn]

well demon tweeks do em

but there will be cheaper places that them i guess

look up weber dealers in yellow pages maybe?

[mikeoxford]

you can delete posts yourself

[mikeoxford]

you can delete posts yourself

lmao aragorn has pointed out im half asleep and also that u dont want the post removed, its just not a wanted add

apologies!!!!!!!

[Snowface]

lol.

[Nova-Boy]

If you are on about a PB1 carb setup on the 1.2 and 1.3 then the carb is the same with 5mm bigger venturi and bigger jets and the inlet on the manifold is 5mm bigger. Thats what i have on mine at the min until i get a twin choke. It just makes it rev better.

As for fitting kit you will just need a gasket for the manifold with some sealent stuff and lots of patients if you are doing it with the head still on! The nuts are a pain in the **** to get off the bottom of the manifold!

[Aragorn]

dont buy the weber for the 1.2 - the give a singe choke weber so it fits the original manifold

u want a 32/34 with fitting kit for a 1.3SR and you will need the 1.3SR manifold

[Snowface]

u want a 32/34 with fitting kit for a 1.3SR and you will need the 1.3SR manifold

yeah. thats what i thought. U can't buy a direct replacement weber 32/34 for a 1.2 though. Only a 1.3 i seen. How do i go about getting smaller jets for the weber for the 1.2? can i use the ones form my pb1?

[Aragorn]

you'll need to get a weber dealer to re-jet it for you

[mikeoxford]

you'll need to get a weber dealer to re-jet it for you

youll find 32 34 dont need "jetting" as such

i believed my weber to be jetted for my 1400 engine.

but running it and tuning it temporarily on the 1600 whilst my 40s away, velos didnt even touch the jetting!

just all the mixtures and fuel circuits

[Euan]

i've got my 32 34 ready to go on but not sure what engine it was on origanaly. do u think its still ok to put on??

[mikeoxford]

i've got my 32 34 ready to go on but not sure what engine it was on origanaly. do u think its still ok to put on??whack it on

when u get i tuned by a garage theyll do the mixtures etc and your emissions