PDA

View Full Version : coil setup



ward
15-04-10, 11:14 PM
rite ive put in an e16se engine into me cabriolet 1.2 nova.

ive changed it to carb as ill be running twin 40s, but never doenethis change before so just wondering wat coil setup i will need and any wires i have to chop?

thanks in advance

mowgli
15-04-10, 11:23 PM
you need to get the complete 1400sr or similar coil & dizzy setup.. but for some reason, they are rare....& expensive.

seriously, there are less wires to get a full e16se injection system running than a 1400 coil & dizzy......

craig green
15-04-10, 11:40 PM
Agree. wire in the E16SE management. Its the plug with about 6 wires on it.

Search for the wiring colours on her, but other than putting in wires for the fuel pump, the only wires you need to find upfront in the bay is a perm live, switched live & earth. Peasey. The other 2 are revs & temp gauge.

ward
16-04-10, 12:55 PM
im going to run a 32/34 weber for a while then swap to me twin 40's.

has anyone got a diagram of the wiring?

mowgli
16-04-10, 01:22 PM
haynes