1.3 head for sale

[russlea]

SOLD SOLD SOLD SOLD1.3 8v head for sale.
have got a £350 receipt from robert walker engineering for gas flowing, 3 angled seats, new valve stem oil seals and a matched and polished inlet manifold. it has also been skimmed 20thou. it has only done 7000 miles since work and was running before taking the engine out (to scrap car).
i had this work done and the engine went from 84hp, to 91hp, and 78 lbs/ft to 97 lbs/ft of torque and have both rolling road print outs to prove.
comes with hardened lifters and springs. i live in hemel hempstead, not too keen on mailing it as lifters etc may fall out.
£200
£230 with manifold

http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69311406022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/
http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322120022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/
http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69323719022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/
http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322121022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/

[russlea]

i have a fully stainless magnex exhaust for sale, 3 silencers, good condition. will bolt onto standard manifold.
manifold sold i also have an ashley 4 -1 manifold, good condition but surface rust.
no pics of centre part of exhaust but can get some if req.
£120 exhaust
£20 manifold

http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322119022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/
http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69311404022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/
http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322118022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/

[russlea]

had these jetted for a 1.3 head, 1.4 bottom end. good condition, one of the trumpets had cracked on the bottom so i used some bonding sealer, any one particular about the look of them may want to buy a new one, (£14 approx)
i serviced both of them before fitting and they have only done 7000 miles since service. comes with braided hoses and twin throttle cable setup, you will not need to buy anything for them. see other posts ive posted for facet fuel pump and filter king regulator if you need them.

£250 for whole set up, not inc pump or regulator

http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322115022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/
http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69311402022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/
http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322116022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/

[russlea]

facet red sticker fuel pump with brackets. perfect for fitting under the spare wheel on a nova (where i put mine)
£15

filter king regulator
£15

http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322123022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/
http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69323750022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/

[russlea]

gsi calipers with grooved discs (hardly used) and pads (15% worn).
one of the calipers has a snapped bleed nipple. i pressure bled it and it was fine.
£80

http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322113022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/
http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69311399022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/

[russlea]

to reroute the oil breather for use with twin 40's.
£20

http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322124022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/

[russlea]

SOLD SOLD SOLDkent ast2 camshaft with carrier to fit ohc 8v nova.
£60

http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69311400022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/
http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322114022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/

[russlea]

this is a brand new 14 inch wheel with a brand new michelin tyre.
£35

http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322125022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/
http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69322126022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/

[russlea]

has only done 7000 miles after rebuild,which was a completely stripped box with new input, output shaft bearings etc.
£50

[russlea]

euro light for a nova.
comes with bulb. £15

http://www2.snapfish.co.uk/slideshow/AlbumID=2078563022/PictureID=69323741022/a=757275022_757275022/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfishuk/

[russlea]

bump

[vnsrliam]

hi mate would you accept 200 for the throttle boddies ?

[russlea]

Pm'd ya mate

[russlea]

Bump

[novait]

you have pm.

[russlea]

Bump...

[russlea]

B u m p

[russlea]

3rd bump in a row

[russlea]

Bump

[harry-nova]

pm'ed

[russlea]

Bump