PDA

View Full Version : e16se compresstion test


stevie78
31-03-10, 08:59 PM
What kind of presure should the gauage read on my e16 when tested
cheers stevie
stevie78
02-04-10, 08:09 AM
ttt
Damo
02-04-10, 08:15 AM
I would have said you should be looking at a good 180psi from them mate my c14se had that kind of reading so i wouldnt have thought ud be far off with an e16se.
stevie78
02-04-10, 09:53 AM
it def goosed then m8 cheers
Damo
02-04-10, 10:08 AM
what readings have you got mate?
Paul
02-04-10, 10:58 AM
Ur looking for a difference between cylinders, any more than 10 is bad, did you have WOT when you did the test?
andy_mk3
02-04-10, 11:55 AM
From memory you should have 12-15bar which is 175-220psi. But a maximum of 10psi or 0.7bar between all the cylinders.
stevie78
02-04-10, 12:48 PM
andy did you have that loom runig a car cant seem too see the fuel pump wire comin out the main plug

the most i got out the cylinders was 75/8/25/45 fookt lol
andy_mk3
02-04-10, 01:11 PM
No mate I picked up that loom by accident, I thought it was a C16SE one so never used it mate.