digi dash problem

[jr_eze]

yo, got my digi dash wired up and everythings going fine the only problem is that there was no wires coming from the transducer itself to run to the back of the dash, will have to make these wires up and join them myself with spades. theres three spades coming from the transducer. do anybody know which colour wire runs to which spade?. cheers

[brainsnova]

if you go to the scrappies a cavalier and calibra have the plug in the drivers door near the bottom centre. theres one there with 3 wires and it fits the tranducer. the wire colours are different but i have a pic somewhere to show which pin does what.

[jr_eze]

have a few cavaliers lyin around, ill take a look for 1 when it stops snowin, just need to know what colour does what now. cheers lad:)

[Southie]

http://i61.photobucket.com/albums/h80/x_novadose_x/wiringdiagramfordigidash.jpg

[jr_eze]

http://i61.photobucket.com/albums/h80/x_novadose_x/wiringdiagramfordigidash.jpg

got the wiring sorted, just need 2 know which spade the live, earth and pulse hook on2 on the transducer side of things as there was no length of wire attached to it. unless its just a case of trial and error. cheers anyway...