View Full Version : My wikid 1.0 Corsa
Yea, not so wikid.
Bought it like this for £250:
http://i252.photobucket.com/albums/hh30/AW_06/BjkbWTBWkKGrHqYOKigEsmVcgY7BLUHSOnw.jpg
I done this:
http://i252.photobucket.com/albums/hh30/AW_06/101_3628.jpg
Done the head lining black.
http://i252.photobucket.com/albums/hh30/AW_06/Corsa42.jpg
Fitted spoiler, removed wiper, fitted boot pop, blacked the bumpers/trims etc, put on a gay smoothed lock thingy (thats coming off asap), as well as my freshly refurbed wheels.
http://i252.photobucket.com/albums/hh30/AW_06/101_3772.jpg
Painted brakes etc
http://i252.photobucket.com/albums/hh30/AW_06/101_3775.jpg
Somewhere a Post-97 Sport interior got fitted too.
And to finish this off, The power plant, or should i say hamster?
http://i252.photobucket.com/albums/hh30/AW_06/101_3790.jpg (http://s252.photobucket.com/albums/hh30/AW_06/?action=view¤t=101_3790.jpg)
Loads of stuff ive missed, see it for yourself.
Plans now, use it. Needs tax the end of this month though.
Comments (I mean, ****ing LOL at me) please.
There is a cylinder missing
There is a cylinder missing
Fell off on the way home, As did my street cred.
add 3 more and race jack. btw a t2 turbo with a 3 bolt flange fits straight onto the exh mani......
fukking gay colour tho.... :d
HAHA dont knock them 3 cyclinder 12 volts! They run with no oil & a SNAFU head gasket bodged with silicone ;)
I miss giving mine death :(
add 3 more and race jack. btw a t2 turbo with a 3 bolt flange fits straight onto the exh mani......
fukking gay colour tho.... :d
That would be kool, but **** if im removing the head etc again to fit a de-comp plate, or spending anymore than £80 on tyres lol
Mate does keep saying i should turbo it though lol
HAHA dont knock them 3 cyclinder 12 volts! They run with no oil & a SNAFU head gasket bodged with silicone ;)
I miss giving mine death :(
lol This one ran with the bores full of water, but was lacking any power, not that it has any.
Sounds ****e though.
what a pile of sh1t the engines are,car looks well though
Spot on for the money, get a xe in there.
Youve got to LOL @ that engine, when its the same size as the airbox. lol
The drivers side engine mount bracket weights as much as the whole car lol lol
sort that rear tow-eye cover!
Looks ok apart from that.
You will get the XE in without having to take the old engine out
Spot on for the money, get a xe in there.
Youve got to LOL @ that engine, when its the same size as the airbox. lol
The airbox is bigger than it lol
Will leave it as a 12v until end of summer, then il fit a 2.0 ;)
And mike, the mount is bigger than the engine lol
John il sort that once ive got some money in my paypal ;)
Muzzy, 36valves and 3.0 litres gen?
And mike, the mount is bigger than the engine lol
Hoooooooooooooj aint it lol lol i had a reet LOL when i noticed it on my old 12 volt beast van conversion.
Yeah lol Looks even worse without the airbox thingy on the side lol
Yeah lol Looks even worse without the airbox thingy on the side lol
The secondary box attached to the air box you mean?
I couldnt figure out what that bit did so i took it off :wtf:
Yeah, some sound reducing thingy, i removed it too!
Bet it sucks small animals in now does it?
Yeah, some sound reducing thingy, i removed it too!
Mine went in a skip at work lol along with a few other engine bits that didnt look right. Good engines tho, theyll do 100mph (just) an are quite nippy round town.
Muzzy, dont stand in front of it, it will suck you in :p
Mike, lol @ random engine bits lol Couple of people said they will do 100mph ish and after all, there ment to have 55bhp!
Oh and i left something out about this car......
Its done 169 thousand miles :eek: Yeah the engine is shagged lol
LOL my 02 reg aint far off that milage lol lol
Yeah seriously, all kinda random bits i took of it, an it still worked. The engine management light was on from the evening of the 1st day i bought it, an never went off again :(
Mine had the EML on, changed the EGR and its gone, AFM is still funked though.
When i bought it the oil pressure sensor was unplugged, plugged it back in and the light came on, Somebody had put a screw into the end of it lol
Well i guess il update this, Since theres no updates on the nova.
Interior shot, check out the nova wheel that i pikied from the nova :p
http://i252.photobucket.com/albums/hh30/AW_06/101_3875-1.jpg
Spruced up the engine bay
http://i252.photobucket.com/albums/hh30/AW_06/101_3898.jpg
I also changed the wheels, i couldnt be arsed buying tyres for the Tigra 5 spokes, so got these cheap, and i think they suit the car :D Old pic but its the only one ive got.
http://i252.photobucket.com/albums/hh30/AW_06/101_3853.jpg
Note towing eye cover, thanks to kissy kissy daveski.
http://i252.photobucket.com/albums/hh30/AW_06/101_3881.jpg
EDIT: I feel i should point out the reason for the badges/stickers, Its due to me removing the vauxhall, corsa and 12v badges, Which also took away some paint, so its in a effort to hide the ****ness of my car, But i need a shiney silver irmscher, and opel badge ideally. But heyho.
Also done a popular corsa mod, Cav RARB, Ment to transform the car, from what ive seen so far, totally agree!
http://i252.photobucket.com/albums/hh30/AW_06/100_3936.jpg
More lol's this way please :d
im sure that ARB is working just fine being tie wrapped on lol
lmfao was waiting for that, The arb does nothing in the middle, so i thought **** it, Zip ties FTW. At least its a big fat **** off one though, not 5 small ones joined together like i used to hold it on while i did up the bolts :eek:
gayyy, sort the nova out :p
Well as ive been using this, nothing much has happend, but im about to update the nova thread too, again :eek:
Painted the RARB silver, no more gash yellow.
http://i252.photobucket.com/albums/hh30/AW_06/100_3945.jpg
Changed some rear bits.
http://i252.photobucket.com/albums/hh30/AW_06/100_3990.jpg
Facepalm
http://i252.photobucket.com/albums/hh30/AW_06/100_4030.jpg
:d
where the fook is the v6 for it?
you painted the rocker lol
Rear arb go on a nova?
where the fook is the v6 for it?
Erm, in the shed, and staying there :p
you painted the rocker lol
Rear arb go on a nova?
I also did some other stuff, clean it up etc, changed since then.
ARB Will not go on a Nova, Nova beam between the holes already in the beam measures roughly 110cm iirc, a Corsa one is 116cm, same holes.
Erm, in the shed, and staying there :p then your an utter gay.
Yeah?
I likes the 50plus MPG
Comment cow Likes this and would like to see MOAR
http://i239.photobucket.com/albums/ff175/Rysee_sri_130/07042010207.jpg
Nova_Sean
09-06-10, 12:27 AM
where did you get the facepalm sticker? I likes
LMFAO rysee, +rep.
Sean, cant tell you :p
meh, floor it with a v6, get to 50 mph and coast it for 4 miles.
50mph, sounds too fast for me.
you really are gay, go buy a 50cc ped.
you really are gay, go buy a 50cc ped.
He'd lose it in his gaping anus. A oversized Nova just about manages to stay out
lollollollollollollollollollollollollollollol
total_vauxhall
09-06-10, 09:42 PM
:thumb:
There is a cylinder missing
missing one? lol id say its missing about 3
Never gets old lol
Trying to find myself some cheap shocks for this, pissed off with the funked ones.
Moo will be disappointed.
Finally got pissed off with the shocks, the noisy alternator, and the juddering that has started :roll:
Trying to sort some new brakes, just cant find what i want.
Keeps randomly misfiring, Yet to find the cause, but meh, only does it
sometimes.
One of the less major problems was engine movement, watching the gear stick was like watching muzzys cock on a friday night ;)
So armed with a brand new engine mount, i fitted it, and im surprised how much difference one mount can make, just need to replace the others now.
Shiney
http://i252.photobucket.com/albums/hh30/AW_06/100_4045.jpg
New, Meet Old, Old, Meet New.
http://i252.photobucket.com/albums/hh30/AW_06/100_4046.jpg
Fitted, So easy
http://i252.photobucket.com/albums/hh30/AW_06/100_4049.jpg
Pointless update but im bored and as most of you know, im a gayer for taking pics.
You love me far too much.
Nice mount :thumb:
Pics do the talking, im in uber pain with toothache (Pain comes and goes, and atm, its at its highest)
http://i252.photobucket.com/albums/hh30/AW_06/100_4059.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4060.jpg
Comments please.
Im not lowering it, im actually thinking about raising the front.
I like the height of it atm, handles well and dont break your back, just a shame the front splitter keeps being knocked off.
New temp wheels
http://i252.photobucket.com/albums/hh30/AW_06/100_4083.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4084.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4085.jpg
New lower miles gearbox (standard corsa F13 CR 3:74 box)
http://i252.photobucket.com/albums/hh30/AW_06/100_4087.jpg
Smooked headlights
http://i252.photobucket.com/albums/hh30/AW_06/100_4120.jpg
Got a new clutch to go in, also fitting pas (Update tomorrow on that), so the engine is coming out next week, few things will be painted, engine bay cleaned up, short shift kit fitted, etc etc etc.
Should point out i solved the juddering by changing the front and rear brakes, wikid!
Love it already, just need to make it better now :)
Dont understand why you dont want a bigger engine lol. You have a 1400/1600? out your nova?
Needs smoked side reps :)
Smooked side reps are in the pipline, will be done once the engine shizzle has been sorted.
I like the 40mpg, have the tigra for power :d
http://i252.photobucket.com/albums/hh30/AW_06/100_4149.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4158.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4162.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4161.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4164.jpg
King of blurry pics.
Clutch i think has managed to last 171k and still has friction material left, just all the springs are funked.
Been collecting bits anyway, dispite PNG's Grow muscles campaign.
http://i252.photobucket.com/albums/hh30/AW_06/100_4136.jpg
I think i need to paint the grass, its now go slow brown :(
http://i252.photobucket.com/albums/hh30/AW_06/100_4135.jpg
Might be done for billing, i doubt it tho!
Lol's this way.
No chance of scratching the engine bay lifting that hairdrier out. Did you lift it out by hand?? lol
By hand no.
Used my little finger.
Test fitted the rad with front mounted fan
http://i252.photobucket.com/albums/hh30/AW_06/100_4178.jpg
Blukhead sound deadening is on, rack is on, pump is cable tied in place until i get a mount. Just to work out what i need to do :)
http://i252.photobucket.com/albums/hh30/AW_06/100_4184.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4185.jpg
I hope my quick-shift will turn up monday so i can get the engine back in.
Want it done!!
Got engine back in
http://i252.photobucket.com/albums/hh30/AW_06/100_4231.jpg
Everything fitted up
http://i252.photobucket.com/albums/hh30/AW_06/100_4235.jpg
The Linkage is funking good, tight and crisp.
Then just a couple of randoms
http://i252.photobucket.com/albums/hh30/AW_06/100_4233.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4234.jpg
Getting pipe made up monday, bracket should be here soon too. Will be done then other than changing the steering wheel and rear shocks.
:)
Top stuff, them 1.0 12volts are wicked engines! Mine was fab!!
This is running ****e atm :( Hesitates to rev sometimes and seems to randomly intermittently misfire for a couple of secs. Plus the exhaust blows like funk.
Will have to wait until its on the road though.
think the hesitate to rev and also the misfire is due to the engine actually believing it has 4 cylinders instead of 3. :p
Silly engine.
lol Keep an eye out down the old 120 and you might see a 4th cylinder down there, always said something fell off on the way home lol
Finally got the PAS pipe sorted today, bargain at £30. Perfect lengh too.
http://i252.photobucket.com/albums/hh30/AW_06/100_4261.jpg
Just need to wait for the bracket to turn up, and pickup the last wiring bits and some fluid then its all systems go for a test of the pas.
http://i252.photobucket.com/albums/hh30/AW_06/100_4262.jpg
Plus just a quick pic i got the other day, i think this has turned out better than my nova did and ive spent less on this.
http://i252.photobucket.com/albums/hh30/AW_06/100_4251.jpg
Hopefully be on the road by the weekend.
Comments pleassee.
Got the bracket yesterday, still waiting on a couple of wiring bits.
Got the bracket mounted up, Just need to remount the reservoir somewhere (New pipe needed i think :( Unless anybody has any ideas?)
http://i252.photobucket.com/albums/hh30/AW_06/100_4263.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4264.jpg
Excuse the cable ties, i had to tie up the reservoir to fill it full of fluid and give it a quick test (Unfortunately i used very thin wire so couldn't do a full test) All seems well though.
So anybody got any ideas on the reserviour mounting, i can only think of getting a longer pipe (Dont know how/where from though :( ) and mounting it on the turret as i had it before, but the pump has moved forward/up with this new bracket.
Set fire to he pas pump, still looking for another :(
Still been adding to the mods tho.
First up was MHWs
Before
http://i252.photobucket.com/albums/hh30/AW_06/100_4319.jpg
Brand New!
http://i252.photobucket.com/albums/hh30/AW_06/100_4321.jpg
Fitted
http://i252.photobucket.com/albums/hh30/AW_06/100_4325.jpg
semi smooth boot is nearly finished too :)
Had a few parcels deliverd today, this is just the things ive fitted today.
http://i252.photobucket.com/albums/hh30/AW_06/100_4327.jpg
First up, interior handles.
Bye old:
http://i252.photobucket.com/albums/hh30/AW_06/100_4328.jpg
Hello new.
http://i252.photobucket.com/albums/hh30/AW_06/100_4330.jpg
Got the rear shocks fitted, set them to half way, will see how stiff they are.
http://i252.photobucket.com/albums/hh30/AW_06/100_4331.jpg
Finally, the replacement arch trim, no longer hangs off at the front.
http://i252.photobucket.com/albums/hh30/AW_06/100_4333.jpg
Much better.
getting there fella looks tidy
Lights look spot on!
In work today i had to use sealer on a Nissam Almera back light, we used some tough-putty stuff thats on a roll, bloody good seal and doesnt go everywhere, just run it around the light, cna mabey try and blag you a roll? :thumb:
comptoncj
11-08-10, 07:09 PM
Nice project mate keep up the good work!
have you had a hair cut yet while your waiting??
iz dey shhmmmmokeyy side reps i see?
Lights look spot on!
In work today i had to use sealer on a Nissam Almera back light, we used some tough-putty stuff thats on a roll, bloody good seal and doesnt go everywhere, just run it around the light, cna mabey try and blag you a roll? :thumb:
Sounds good, catch me on msnski
have you had a hair cut yet while your waiting??
No, its for keeping my head warm in winter
iz dey shhmmmmokeyy side reps i see?
They are indeed :)
Moffat and comptoncj, cheers dudes
You got rsx coilys on the front ?
Only just seen your post, nah, im actually thinking about raising the front 10mm as its becoming a problem, getting it in and out my mums drive is hard enough, do it at the wrong angle and i lose the exhaust :eek:
Ahh funk it im gona pic whore, copied from another forum:
Had a few questions asking if the ride height had changed from other forums so got a few pics, and then this morning i got on with fitting one mudflap to see if i like it, Wasnt sure at first.
http://i252.photobucket.com/albums/hh30/AW_06/100_4336.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4334.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4335.jpg
Flap fitted
http://i252.photobucket.com/albums/hh30/AW_06/100_4338.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_4339.jpg
I think i like it, need to get the badges on them sorted though, going for Opel blitz badges now im having a semi smooth boot.
flaps suit corsas man looks tidy, how come the back box sits so far out?
Because its just a tip lol, it does sit out to far but i cba to do anything about it.
got a magnex here :)
http://i249.photobucket.com/albums/gg228/moffat_photos/corsa2.jpg
It doesn't suit those flaps with non colour coded bumpers. The silver one does however
Neglected? Hell yeah.
Got badges on the flaps though, i think they do look alright.
http://i252.photobucket.com/albums/hh30/AW_06/102_4394.jpg
Got this now though...
http://i252.photobucket.com/albums/hh30/AW_06/102_4401.jpg
http://i252.photobucket.com/albums/hh30/AW_06/102_4400.jpg
12v is working ok but needs some things sorting like the pas still, few other bits too and im starting to think about breaking/selling it.
Tidy little Sport you got there aint it!
Likin the new corsa, whats the plans?
Depends TBF, If i break the 12v il swap all the good bits onto the sport. If i dont, smoked side reps, depos, debadged grill and most of all, get some more fecking power out of it.
The silver one does however
cheers fella
and most of all, get some more fecking power out of it.
what engine you putting in it? lol
lol engine mods will be first, maybe next year a ecowreck, plans keep changing so.
stick a 20XE in it!
You will not look back.
Funk the cost though when you can pickup a whole vectra for £150 tops
Funk the cost though when you can pickup a whole vectra for £150 tops
20XE's are better, more reliable, more pars around, more know-how, etc etc
If you can find me a Vectra for £150 ill buy it though :thumb:
lol i knew of one for under a 100 a week ago but had no space.
I havnt had a problem with ecowrecks yet, been ages since ive seen any 20XE's in scrappies or the like though, bit of tuning to a good eco will be enough for me.
I was in a couple of scrappys today an couldnt even find Cavalier let alone a decent engined Vectra :S
I went to one today, it had a 8v cav and a few veccys including an SRi140
General Baxter
04-09-10, 10:41 PM
I went to one today, it had a 8v cav and a few veccys including an SRi140
what year was the sri140, fancy 5 finger discounting me the abs pump lol
Can deffo tell ive been using the 12v as there has been no updates on it lol
Got a new backbox coming for it, I fixed the pas pump, seems to be OK atm. Other than the suspension being harsh as ****, its not been too bad, 50mpg is nice.
As for the black sport, i need to do some engine work, already sorted the lifters, bottom end shells need doing too, got the bits through today so il try and crack on with that tomorrow providing i can fit it in all in with everything else i need to do.
PS, 173k miles now ;)
PS, 173k miles now ;)
It'll run to 200k I reckon
May do, ive replaced a fair few things but i imagine rings/crank will die before then. Hopefully not before ive got everything for the conversion, whichever i plan lol
Still using this daily, got new wheels/tyres fitted finally, just waiting on some centre cap stickers.
http://i252.photobucket.com/albums/hh30/AW_06/102_5175.jpg
http://i252.photobucket.com/albums/hh30/AW_06/102_5177.jpg
Waiting on a new backbox :roll:
PAS setup works, although isnt finished as i want to move the pump down a inch or so, also need to do the securing clamps that i havnt done yet. But its secure enough atm.
http://i252.photobucket.com/albums/hh30/AW_06/102_5174.jpg
Still waiting on some bits to get the sport done :(
****ing love 12 valve engines me! Proper bomb proof :)
You keep saying that lol. I do like the 50mpg i keep getting, but with a engine in the back too, god there slow.
Motorway trips are nasty, down hill you overtake everything and then uphill your passed by everything you just overtook.
Mine was well quick up or downhill? We still managed a one'r in a 1.2 SPi with an Integra engine & box in the boot aswell, they weight about the same as a small house lol lol
comptoncj
04-10-10, 06:16 PM
Got the PAS working then! was thinking of fitting it to the gsi keep up the good work
Mine was well quick up or downhill? We still managed a one'r in a 1.2 SPi with an Integra engine & box in the boot aswell, they weight about the same as a small house lol lol
lol Coming back with the engine in the boot last night was death, was having to change gear like a mofo to even get up slight hills.
Got the PAS working then! was thinking of fitting it to the gsi keep up the good work
Yeah it works, ive got it on a switch as the motor or pump are ****ed still though. If you fit pas to the gsi, that really will be just like when CG had it lmao
^I got a complete Corsa PAS rack, resovior & associated pipework here doing nowt if you need it. Scrapped the pump IIRC?
comptoncj
04-10-10, 06:23 PM
lol yeah i should have just bought the complete car off him lol
I got one backbox for it, Didnt like it, Not loud enough and was a rubbish fit (Scorpion)
http://www.corsasport.co.uk/carimages/9182/102_5265.jpg
So got a magnex on.
http://i252.photobucket.com/albums/hh30/AW_06/102_5224.jpg
Gave it a wash
http://www.corsasport.co.uk/carimages/9182/102_5267.jpg
Finally found a damm rare thing.
http://www.corsasport.co.uk/carimages/9182/102_5270.jpg
It could do with a recovering but i could get it recovered. Not bad for £20 though imo, feels nicer than the old rubber one.
Im going to sort the boot badges, and that finish will the car for now too.
Who is this alex noob, and why have you got awo6's corsa ???? lol
General Baxter
28-10-10, 08:11 PM
Who is this alex noob, and why have you got awo6's corsa ???? lol
this also confused me
lol Most people knew my name anyway, and i was sick of being out of date :(
Yea but that means your not AttentionWhore06 anymores :cry:
nice to see the exhaust getting used fella
Bit of a update.
Need to get some 60mm rear springs:
http://i252.photobucket.com/albums/hh30/AW_06/102_5285.jpg
Put the white wheels on while i sort a tyre problem.
http://i252.photobucket.com/albums/hh30/AW_06/Image009a.jpg
Rubbish phone pic obviously.
Black sport passed its mot, Just need to get it taxed and a couple of other jobs on it. But wont be long.
http://i252.photobucket.com/albums/hh30/AW_06/102_5311.jpg
Will swap the wheels back asap and find some black side reps.
Its got the freebie scorpion backbox on as the old one was rotten as funk, had to fit a new cat too.
http://i252.photobucket.com/albums/hh30/AW_06/102_5313.jpg
Keep meaning to get some decent pics of the 12v, but the dark nights keep ruining that!.
Wikidy bo brap brap yo. Init. Put the old old wheels back on the blue one :mad:
Those gay flat ones? There long gone.
want some 90mm rear springs
Threar poaching at its worst lol
Too low :d Although, Price? :p
Decent pic of the white wheels.
http://i252.photobucket.com/albums/hh30/AW_06/102_5316.jpg
Comes off the road tomorrow, Got a few small plans, nothing major. Hopefully only for a couple of weeks anyway.
The Black Sport is taxed, I'll get it on the road tomorrow :d
I like the white wheels on the blue egg, suits it well imo
Yeah, They may stay, Not sure. Can notice the width difference. The silver 5spokes suit the black one too imo lol
Its Officially ****ed. Getting 50Psi in one cylinder. One cylinder at full compression won't start it.
Tip of the day, check your car has anti-freeze.
Pistol Pete
10-12-10, 08:11 PM
Oooops.
Southie
10-12-10, 09:19 PM
Erm that's not good :( I thought you'd be aware of anti freeze Alex ;)
Indeed, I was sure it had anti-freeze in it, i checked the other cars, But never this.
Need to decide what to do and how to do it.
dougie_boi
10-12-10, 09:25 PM
Indeed, I was sure it had anti-freeze in it, i checked the other cars, But never this.
Need to decide what to do and how to do it.buy a nova you know you want to
i actually came over and drained out the antifreeze and refilled it with water. fed up with you not fitting a redtop :p
So whens it going in? lol
Calamity Josh
11-12-10, 07:45 AM
You live in essex don't ya mate, iv'e got some 60mm's if your interested pm me:thumb:
You live in essex don't ya mate, iv'e got some 60mm's if your interested pm me:thumb:
I think he will be more interested in a new engine or a repair for his, rather than lowering springs :p
He's probably not going to want the springs either as he's got a set of -60mm springs forsale lol
Alex, you can have my mullered 1.2 8v next week if you wanted it lol
What engine you after please dont say another missing-one-cylinder engine.
Let us know if you need hand finding one :thumb:
lol Its rear springs i want, i only had -40 rears with -60 fronts for sale, exactly the same setup that i run on this now. May PM you in a bit josh.
I don't know what I'm going to do yet, I'd like to repair the 12v because that will be the cheapest thing to do. I do have a couple of baby xe's laying around that i could lob in, but even they require some work (Building!), so there is a couple hundred quid needed.
It may end up being a case of finding another car for the next few months, stick the 12v to one side and slowly building it up with a baby xe.
I forgot to do a wet test last night. Done one just now, Piston ring has gone, Coincidence maybe.
Don't know what to do :(
Is this still a 12volt (I cba to re-read a few pages).
JUst fit a new engine will cost next to nothing I'd imagine.
It is indeed about the 12volt. 12v engines are expensive, its hard to find a good cheap one, i tried when i bought this car.
Right, i done the wet test, spoke to my brother and suggested i tried putting oil down it again and putting the plugs back in before trying to start it. Which worked, it runs, it even starts now. So, the piston rings must of just been a bit stuck? whatever its fine now.
Cool.
http://i252.photobucket.com/albums/hh30/AW_06/100_5462.jpg
Dirty.
mk1nova_rich
22-12-10, 06:35 PM
Looking good pal :)
Kissy dave style update, I cleaned it lol
Was looking proper ****, although you cant see it due to the rain.
http://i252.photobucket.com/albums/hh30/AW_06/100_5474.jpg
The end result.
http://i252.photobucket.com/albums/hh30/AW_06/100_5493.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_5495.jpg
Done the normal two bucket method, Clay, Polish and finally waxed. I just need to do the plastics and wheels now, Tomorrow.
I'm not normally/Never used to be a fan of bonnet lifters, But thought what the hell, There slightly win, slightly a pain in the ****, Bit of adjustment needed I feel.
http://i252.photobucket.com/albums/hh30/AW_06/100_5484.jpg
Waiting on a load of things to improve the looks, More on them when they all arrive.
Comments please, Uber bored :(
looking good man, prefered the tigra wheels though
They may go back onto it yet, Just need to find some more wheels for the black sport if I keep it.
what about colour coded bumpers? they wouls suit imo
i really want another corsa
I dont want CC'ed bumpers, IMO its the wrong colour for that. Just got a few small things planned for the outside, Not going mad with it.
ryansnova
29-12-10, 01:23 AM
nice wee car how much is it lowerd ?
60 front, 40 rear, Although I've ordered some -60 rears.
Couple of pics:
Still waiting on centre cap stickers.
http://i252.photobucket.com/albums/hh30/AW_06/100_5496.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_5499.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_5500.jpg
Comments please.
Bet you did a few handbrake turns on that ice
I tried, its not slippery enough or complete sheets of ice :(
would look better with all opel badges and not missing the boot one...
Its not missing any boot ones?
Semi smooth boot is being sprayed so all will be gone then.
the one on the boot handle...
it needs to be opel lol
They are like £15 for one of those, Will be gone with the semi smooth though obviously.
15 for complete coolness!
post up the pic of the r5 intercooler in the bay pretty please lol
Needs a bigblock :)
http://www.corsasport.co.uk/carimages/9182/100_5502.jpg
http://www.corsasport.co.uk/carimages/9182/100_5503.jpg
Much better.
Not using the car atm since I got fed up of driving it so using the sport and now doing the long long list of jobs on this.
Before:
http://i252.photobucket.com/albums/hh30/AW_06/100_5532-1.jpg
After:
http://i252.photobucket.com/albums/hh30/AW_06/100_5537.jpg
Low enough? lol
lol pretty low on the back there.
What springs are they? The eBay adjustable ones? Looks spiffing Mr Alex.
lol I'll come clean, That is with no springs, Arches sat on the wheels, on the bumpstops.
Wanted to see how low it can go before rubbing/bottoming out, Got new springs coming this week, Want it between the first and 2nd pic, Depends how it drives etc.
what size of tyres are they?
195 50 15
45's would clear on the back and I could run it that low without mods.
Springs turned up, Seem alright. Haven't driven it yet though.
http://i252.photobucket.com/albums/hh30/AW_06/100_5544.jpg
http://i252.photobucket.com/albums/hh30/AW_06/100_5543.jpg
Need to find a new splitter. Should point out, Std plate is back on since the 3/4 plate wouldn't stick on properly, Job for another time.
http://i252.photobucket.com/albums/hh30/AW_06/100_5546.jpg
:)
what size are the springs man?
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.