4 Dial clocks and leccy windows.

[boyracergti]

im looking at a set of 4 clock dials for my 92 1.2spi how much will it take for them to work? are the 6 clock ones any harder?

also got a problem with the passengers window has stopped working when you push the switch the revs dip and the motor clicks but it doesnt move :S checked the terminals and the motors getting 12v and checked the resistance of the motor and didnt get open circuit :S help please

[mk1nova_rich]

6 dial clocks will plug straight into a 1992 injection Nova :thumb:

[boyracergti]

will the 4 dial ones fit too? as ive just got some :)

[mk1nova_rich]

will the 4 dial ones fit too? as ive just got some :)

which dials do they have?

[boyracergti]

they have rev, speedo, fuel guage and coolant temp, they look the same as the 6 dial one just there are lights instead of the top two guages its says they are out a mk2

[mk1nova_rich]

yeh, so they have 6 dials but only 4 with needles? think i have got a set at home that i took apart to repair my 6 dial SR clocks lol.

As long as the above are all connected at their respective locations (ie. fuel gauge at tank and so on) just take the existing clocks out and fit the new ones and jobs a good 'un :)

[mk1nova_rich]

remember you can only pull the clocks out so far on removing, then you need to release the 14-pin plug by squeezing the ends and release the speedo cable by pushing the spring tab towards the clocks.

For a bit more room behind the clocks, go to the engine bay and push the speedo cable as far through the bulkhead grommet as it will go

[boyracergti]

awesome thanks dude :)

[mk1nova_rich]

no problem mate, hope you get them fitted and working :)

[brainsnova]

as for the window try wacking the round tube bit on the motor while pressing the switch.

[boyracergti]

as for the window try wacking the round tube bit on the motor while pressing the switch.

Will try that tommorrow cheers

[mk1nova_rich]

i had a similar problem with my old Nova, remedy was to fit winders!! lol