Knock sensor wiring help?

[Damo]

Do's anyone know what wires do what on themini loom that goes to the knock and ICV?

Ive got,

A. red/blue
B. brown/blue
C. thick black
D. brown/black
E. brown/white

Right C,D,E go to the knock sensor wiring but only D,E go to the plug pins im More intrested in what the C the thickish black does as iv no power what so ever to any of the wires that go to the knock sensor.

Any help mucho apreciated guys.

Damo.

[Damo]

Also read on another forum that this is a common problem on these engines and that you need to run another wire from the ecu to the plug that goes to the mini loom does anyone know what ecu pin i need to run from?

[Adam]

Have you got a multimeter?

IF so check for a circuit between the knock sensor plug pins and the ecu plug pins

[Damo]

Have you got a multimeter?

IF so check for a circuit between the knock sensor plug pins and the ecu plug pins

Yea ad checked the circuit between the knock sensor plug and got nothing but the ecu's a little difficult as the plug dosnt stay in without the black cover on it lol.

Also theers a black wire that goes in to the mini loom but dosent go down to the plug on the knock sensor any ideas what thats for. :confused: